Sig Trailside?


PDA






ddj8052
September 14, 2004, 10:17 PM
Well I ordered a Sig Trailside today. I am picking it up for $400. Is this a OK price? Keep in mind I live in Cali, so our prices seem to be a touch higher then everyone elses. I orded the 4" target model. I have always liked the looks and feel of these guns, but I have never actualy shot one. I had a Ruger MKII, but mine was a POS. It constantly jammed, misfired failed to feed etc. Sights were always coming loose. If it could be a problem it was. It totally soured me on the Ruger .22 autos. So I hope the Sig is nicer. What are your guys experiences with the Sig. I would appreciate any thoughts or comments Thanks Juan.

If you enjoyed reading about "Sig Trailside?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Shmackey
September 14, 2004, 10:21 PM
I've had both. Still have the Sig.

Actually, the Ruger was more reliable for me--my Sig is finicky--but the Sig's balance smokes the Ruger, and the trigger is better once you get used to it.

I think the Sig is definitely "nicer," but the Ruger was strong like bull and very reliable.

See if you can't get your hands on a pair of the laminated gray/blue wood grips that the Target models used to have. Super pretty and much nicer to hold.

Sactown
September 14, 2004, 10:23 PM
http://www.imagestation.com/picture/sraid98/p910c3c23c9b925ff0029124b6ab6dd08/f9fea734.jpg

This one is mine. Right after I got this, the IZH35M became available. I hardly takeout the TS now. It's a great gun, but for Bullseye, the IZH was way better. I had problems with my 2 MkIIs, but a quick change to the Volquartsen extractor and everything has been smooth. My front sights came loose as well, but a little loctite and all was well. They're all good .22s.

j_a_espo
September 15, 2004, 12:10 PM
I've had a trailside (4" Standard Model) for several months. I mounted a red-dot and once zero-ed it's been very, very accurate. The reason that I bought the pistol was to shoot silhoutte at the local club. Lot's a fun.

Initially, there was a small flat-spring that broke but my local gun-store is factastic. They fixed it and even have extra springs on hand in case it happens again.

Mine does not like some cheap high-velociity rounds. Loves CCI and shoots Reminton Golden Bullet HP and Winchester Super X nicely. All sub-sonic ammo that I tried worked fine. Just a little finiky about some high-velocity rounds that I was using for casual plinking.

Enjoy!

pellethead
September 15, 2004, 12:20 PM
Sactown,
That pic makes me want one!

D

SouthpawShootr
September 15, 2004, 12:21 PM
$400 for the target model is pretty good around here. I think the lowest I've been able to find one as $459. 4 inch Target models aren't that easy to come by. Seems that everybody was the guns that have adjustable sights to have 6 inch barrels. 4 inch standard models are all over the place. I was going to get a 6 inch Target last gunshow, but something else caught my eye. It's on my short-term aquire list and I've already secured a set of factory target grips for it (www.e-gunparts.com has best prices if they still have them - $50). They also carry the barrel weights. This let's you build a Target model up for way cheaper. I think you'll like it.

SiG Lady
September 15, 2004, 12:38 PM
I've had a Mark II Government Model for nearly three years and it's been fabulous. Heavy gun with little or no recoil. I've also fired the Sig Trailside and at short distances it seemed fine but I didn't do a comprehensive testing with it (it wasn't mine). The owner of that gun at the time was having ammo selection problems with it, but I think he's ironed that out.

The people that I've known who HAVE had 'trouble' with their Rugers usually just needed to find the right ammo for 'em. .22LRs are just fussy sometimes. I use Federal Gold Medal (711B) in the Gov Model and haven't looked back. It costs a little more but is easier on the gun and is verrrrry smooth stuff by feel. I don't put CCI Mini Mags or the cheap Federal or the cheap Remington thru my Mark II at all. It doesn't need that kind of blast. I want the gun to last and to feel good as it fires. In a nutshell, I've found the comfy AND reliable combination of gun and ammo in .22LR with what I'm now doing.
:cool:

phantom309
September 16, 2004, 12:36 AM
My 6" Trailside has been kind of tempermental. Failures to feed on the second to last round of every mag. Sig replaced the (MUCH TOO EXPENSIVE) mags under warranty and it works acceptably well - slide fails to lock back occasionally but it's getting better as the mags wear in.

It's a sweetheart to shoot. Beautiful trigger compared to a Mark II. Very accurate.

B27
September 16, 2004, 12:40 AM
The only ammo I have found that is both accurate and makes my Tsides run reliably is CCI Pistol Match and Standard Velocity.
With those two loads the guns both run and group beautifully.

http://www.fototime.com/E82002BBDD49390/standard.jpg

My bull barrel MkII is much less picky about ammo, and is 7Up can at 30 yards accurate with Remington Golden Bullet solids-

http://www.fototime.com/1FAFEF25A863953/standard.jpg

-but it cannot prodruce groups as small as the Tsides do no matter what I feed it.
But that doesn't stop me from considering it one of my favorite rimfires.

:)

SiG Lady
September 16, 2004, 12:50 AM
Oh, I forgot to mention that I long ago had the trigger tweaked a little on the Mark II. Verrrrry light. Nice tight little groups. :D

gigmike
September 16, 2004, 10:12 AM
My 4" Trailside has been very accurate and has had no problems with Remington hi velocity rounds. I've only put about 400 rounds through it, but I can't imagine I'll run into any probs.

1911WB
September 16, 2004, 11:14 AM
I got my 4" Trailside not long after they came out. One thing about them is according to my dealer who got info from Sig is that they are made for standard velocity, not high velocity ammo! Other than that I love mine- great trigger and super accuracy. The $400 price isn't bad. :)

If you enjoyed reading about "Sig Trailside?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!