[goon]

I went to load some 7.62x54R ammo awhile ago and I found that the holes in my RCBS loading block are too small to fit the 7.62x54 rim. Can anyone tell me where to find one that will fit?

[Black Snowman]

If you have access to a drill press and some scrap wood you can make your own. Various sizes are also available from places like Grafs.com MidwayUSA.com and others. I frequently use trays from pistol ammo boxes as loading trays because I'm really cheap ;)

[goon]

I found one at Cabelas that goes up to .460 Weatherby. According to my manuals it has a bigger rim than the '54R so it should work.
I also have a loading block that is a recycled .45ACP cartridge holder. I am cheap too but nothing I can scrounge will fit the '54R. I don't have the time to make one right now so I'll have to buy one.

[donkee]

Midway is having an inventory reduction on Winchester wooden blocks. You might want to check them out. I'm grabbing a few different sizes........

[dodgestdshift]

When loading for my 45/70, I use a shotgun block. It works fine.

[goon]

I found them at Midway. Ordered two tonight along with 500 more peices of brass and some bullets. They are for the 460 Wby with a .665 diameter hole. The '54 is a .570 IIRC so they should plunk right down in there.
Thanks.