[scott5]

Hello all;
I have a question for any one with one of those Windows balistic programs.
I bought a 500 count of 190gr. lead Gas Checked spire point bullets for the 30 06, and I would like to find a medium burn rifle powder load that would top out at about 35K, as per this sight;
http://www.jesseshuntingpage.com/articles/guns/category8/9.html

I've got a load using H414, Winchester cases, CCI 200 primers, starting load of 40.5gr, going up to 42.5gr in 0.5gr increments to see if I can get some accuracy out of it.
I figure lead won't wear out the barrel the way jacketed will and it might be a good plinking load. Thanks in advance.
Happy shooting.
Scott5

[Gewehr98]

But I don't remember it working with cast bullets for rifles. I'll have to fire it up again and give it a shot.

I'd wager Alliant 2400 or Accurate XMP-5744 might give you what you're looking for, though. I use them for my own 180gr .32 Remington and 190 grain 8mm Mauser cast/gas checked loads.