1911 barrel question


PDA






Razor 10
December 21, 2004, 12:56 PM
I have been arguing with a friend of mine about Clark cut ramped barrels vs. nowlin cut ramped barrels. Let me start by saying he has Para Ord. .40 double stack ( not sure which one) but it has the clark cut in the frame. He wants to make it a 10mm with a new barrel and says he is going to use a nowlin cut barrel because he has access to one. I told him it would not work because the frame would not stop the barrel. He would be relying on the link to stop it. Which to my understanding is not a good thing.


I thought I would run it by the crew here. So what do you guys think?


Thanks
Nick

If you enjoyed reading about "1911 barrel question" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
MoNsTeR
December 21, 2004, 01:00 PM
You are very correct. You can't use a W/N barrel in a C/P frame, nor can you convert a C/P frame to W/N (though I believe the reverse is possible). I do not know if it is possible to convert a W/N barrel to C/P, but that would be pretty silly anyway since it would be easier to just buy a C/P barrel in the first place.

Razor 10
December 21, 2004, 02:24 PM
Thanks for the reply. So I am right, I can't wait to end this argument.




Nick

stans
December 22, 2004, 08:01 AM
I won't say it is impossible to do, especially on a steel frame. You probably could weld a chunk of metal into the frame and completely recut it for a Nowlin barrel, but it would be cost prohibitive and you might royally screw up the heat treatment of the frame in the process. Far more cost effective to buy a 10mm with the Para/Clark design ramp or get one in 40 S&W and ream the chamber to 10mm.

If you enjoyed reading about "1911 barrel question" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!