hs6 or wsf


PDA






sjones
December 30, 2002, 08:39 PM
what do you think of HS6 or WIN WSF for higher powered loads?Looking for a good all around game load and what number of shot for pheasants?
also on a different question,I am new at this and was loading federal plastic hulls with the fiber basewad. The load was supposed to be 21 gr of clays,well I loaded 4 boxes of #9 shot,1oz with 19.1 grains. Do you think they would be dangerous to shoot? thanks. sj:confused:

If you enjoyed reading about "hs6 or wsf" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
HSMITH
December 30, 2002, 09:04 PM
Hey, glad to see you made it over here.

I have not loaded HS6, but I have burned pounds and pounds of WSF. It will load a really nice game load with 1 1/8 oz or 1 1/4 oz in 12 gauge. I prefer #5 shot for all of my bird hunting except doves and grouse, for them I use #6. The #5 shot is my favorite for pheasant in particular, it works really well!!! I have shot over 100 pheasants in the last 3 years with 5's BTW, so you know I am not guessing. Most all were with a 20 gauge, 1 ounce of 5's at 1200 FPS. A few this year were with 12gauge, 1 1/4 ounces of 5's at 1440 FPS. The 12 ga load is simply awesome, but you had better let them get out a little ways.

The 19.1 load is plenty safe. You can cruise over to the Hodgdon site and check for yourself. I shoot a similar load for skeet and they work really well, mine is 19.2 in a AA hull with all Winchester components.

sjones
December 30, 2002, 09:13 PM
could I use that same load in remsts hulls? I just bought 500 of them from ebay. sj

HSMITH
December 30, 2002, 09:56 PM
Hope you did not pay more than 5 cents each:eek:

Anyway, the 19.1 is safe in the STS hulls with WAAF1 wads and Winchester primers. Check the load data if you change any components.

If you enjoyed reading about "hs6 or wsf" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!