[lwh723]

Hi,

I own a Browning A-Bolt II varmit, and while I love the gun, the trigger is a little heavy; so I was wandering if someone out there could tell me what my options are. Drop in, mechanically adjust, polish, etc?
Thanks,
Luke

[Omaha-BeenGlockin]

Been awhile since I messed with mine---but here goes.

You have to remove the floorplate and turn down(clockwise) the tiny screw that is hidden in there---that will decrease the poundage of the trigger pull---No other adjustments by the user should be done.

No aftermarket triggers are available that I'm aware of-----Any other work should be done by a gunsmith.

[lwh723]

Thanks Omaha,

The screw was there, just as you said. I didn't actually try any adjusting, yet. I didn't have my little screwdrivers handy, and that is a little screw.

-Luke

[Nero Steptoe]

If the screw in question is inside a small coil spring, then the screw doesn't adjust the trigger pull weight. At least, that's the way it is on a Micro-Medalion. Could be different on the A-Bolt, I suppose.

[rugerfreak]

Take a look here:

http://www.browning.com/products/manuals/abolt2/abolt2.htm#Trigger%20Adjustment

Then click on trigger adjustment.