Need Picture of Mossberg 590 - HELP!


PDA






Maxinquaye
April 8, 2005, 10:59 AM
Hi Mods; I know this belongs in the shotty forum, but I've been posted there for a day and I really need to get this thing re-assembled. May I temporarily plead to a broader audience?

Basicly I need a couple pictures of the trigger group of a Mossy 590 so I can reassemble mine. I took it apart without taking pics, assuming the diagram would be in the manual (it wasen't). If someone could just quickly snap a picture of their trigger group showing placement of the springs (preferably with hammer down and up) I would be deeply indebted!

First one to post or send me pics will get a free puzzle (I'm a woodworker) mailed to them free of charge :D

If you enjoyed reading about "Need Picture of Mossberg 590 - HELP!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Guy B. Meredith
April 8, 2005, 04:09 PM
The Mossberg web site has owner manuals. http://www.mossberg.com/selectmanuals.htm On pages 10 through 12 are disassembly and assembly instructions. There is also an exploded diagram. Not sure there are enough details on mechanism, though if you have gone beyond standard disassmebly.

scout26
April 8, 2005, 04:14 PM
Try:
http://www.e-gunparts.com/productschem.asp?chrMasterModel=0840z500 (http://)

Numrich has the exploded diagram of a 500, I would imagine the 590's trigger group is the same.

Maxinquaye
April 8, 2005, 07:38 PM
Thanks for the help guys. The manual does not go into the disassembly of the trigger group, and the exploded diagram is too grainy and does not explain the relationship of the springs to the associated parts :(

scout26
April 8, 2005, 08:21 PM
I'll send you some digital pictures of mine from different angles this weekend.

Maxinquaye
April 8, 2005, 10:38 PM
Thanks scout...I owe ya. IM me your mailing addy when you send them and I'll ship ya a puzzle.

Amish_Bill
April 9, 2005, 12:36 AM
Does this show what you want? I'd go into deeper detail, but I'm not going to rip my trigger apart. Sorry.

http://crankylabs.com/gallery/holding/CRW_1816
Cklick on it for a bigger version.

Maxinquaye
April 9, 2005, 12:58 AM
Bill, I believe that should do it. Thanks!!!!

Scout and Bill, IM me your addy's if you like and I'll ship you out a gift of appreciation...

Amish_Bill
April 9, 2005, 12:59 AM
If you insist. :-)

mnrivrat
April 9, 2005, 08:29 PM
Hope all goes back together well for you - If you need furthure assistance PM me and I will either send you pic's , or if all else fails , you can mail me the trigger group and I will re-assemble it for you .

Maxinquaye
April 9, 2005, 10:59 PM
Man, I swear, the NICEST people on this forum :D

I got it together allright with the picture Amish_Bill sent me. Still took forever; those springs are a $&@#!! Thanks for all the input, thanks mods for letting this thread slide in the wrong forum, and TAKE PICS next time you're thinking about disassembling a trigger group :D:D:D

steveracer
March 9, 2009, 09:43 PM
OK, so I'm ressurrecting an old thread to try and get the same help. The picture shows what I need, but where, oh where, does the bottom leg of the front spring go?
Steve

If you enjoyed reading about "Need Picture of Mossberg 590 - HELP!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!