Anybody have a bar-sto barrel for a CZ75?


PDA






caz223
March 25, 2003, 09:47 AM
I have 2 cz75bs and neither of them has a good lockup, and neither consistantly hits a paper plate at 25 yards. Not 10/10.
There seems to be no rhyme or reason, as they are accurate enough at 10-15 yards.
I do all my practicing at 7 yards with my CZs or my smith 5904, all of which really suck in the long range accuracy department.
The outside diameter of the barrel of the one I checked is horribly out of round, and where it meets the slide, lockup has anywhere from .002 to .004 slop in the fit.
I think a bar-sto barrel would help, but I hesitate to spend $200.00 on a new barrel for a $400.00 gun.
Is it something that CZ should make right?
Should I bite the bullet, and buy the bar-sto barrel?
Or should I try electroless nickel the barrel and slide to make the lockup tighter? (It would still be out of round.)
Keep in mind that the slide "bushing" isn't perfectly round, either.
My other autos and revolvers have no problem getting nice 2"-3" groups on a paper plate at 25 yards.

If you enjoyed reading about "Anybody have a bar-sto barrel for a CZ75?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
BevrFevr
March 25, 2003, 11:29 AM
I'm wondering how a pistol can be accurate up close and not accurate farther away? -bevr

BevrFevr
March 25, 2003, 11:56 AM
Another thought could the .002 difference be in how you are holding your caliber?

If you have even a slight cant on that thing it could easily account for a few thousandths.

-bevr

caz223
March 25, 2003, 01:09 PM
I guess I'll have to bust out the micrometer.

PCRCCW
March 26, 2003, 08:19 AM
CZF has a BarStoed CZ.......he can fill us in a little if hes used it......
Shoot well

Tom B
March 26, 2003, 04:50 PM
Please let me break into this CZ75 barrel thread to ask another question. Anyone know of any other match grade barrel manufacturers that make a replacement for the CZ75B? As far as Bar Sto goes several years ago I sent a CZ75B to Alpha Precision for a fitted Bar Sto. Jim waited for MONTHS for a barrel to arrive from Bar Sto. It never did and we finally gave up. I haven't purchased a barrel from them since then but always make sure Bar Sto has the barrel you want in stock before you purchase it or you may be in for a very long wait.

CZF
March 26, 2003, 06:16 PM
You can see my Bar-Sto barrels at CZFSHOP. Click on the
Bar-Sto banner.

caz223
March 26, 2003, 09:42 PM
Is the accuracy good with the bar-sto?
Did you get it fitted, or semi-drop in?
Any other mods done to your cz?

Dacos
March 26, 2003, 11:14 PM
CZF,

I clicked on the Bar Sto banner but nothing happened. Do you have a direct link?

Dacos
March 26, 2003, 11:17 PM
Anyone know if Barsto's barrels for the AT-84 fit Sphinx AT-2000 series?

Rally Vincent
March 26, 2003, 11:22 PM
Bar Sto. (http://www.barsto.com/)

Tom B
March 27, 2003, 07:00 AM
CZF - You have a very nice website and I enjoyed browsing there but one question. You show pictures of factory CZ as well as Bar Sto barrels. The pic of the CZ75 SA barrel is different than the CZ75B barrel in regard to the lugs. My CZ75B SA barrel is identical to my CZ75B Mil Turk barrel. Is that an older model CZ75 SA or what?

WESHOOT2
March 28, 2003, 05:35 AM
My EAA 9x19 Witness has a Nowlin barrel, fit by Bob Cogan at www.apwcogan.com.
This combination is accurate (good ammo :cool: ) beyond human capabilities.
Only change one might consider is a slightly 'SAAMI-ier' chamber dimension, for more reliability with reloads.

Since '95 or '96, sixty bizillion rds, flawless.........and mine :D

WESHOOT2
March 28, 2003, 05:37 AM
Gotta Bar-Sto in my 45 ACP 1911 Caspian; only brand I'd use in a 1911.

Just me.

CZF
March 28, 2003, 05:56 AM
They are semi drop-in.

The BAr-Sto .357 SIG tube was quite wide in the barrel lug.
Wouldn't fit in my .40 caliber 75SA. I don't have a
Gunsmith here....so i gave up the idea of a .357 CZIG.

Those with .40 caliber 75Bs report great sucess. The Bar-Sto
gives better lock-up, thus increased accuracy.

MY SA and CZ75 barrels seemed to be the same. The .40
went to a good home, and i bought a 97B, converted it.
Sadly, there are no plans for Bar-Sto to make any 10mm
tubes for the 97B.

DMK
March 28, 2003, 11:02 AM
CZF, what ever happened with the Bar-Sto 357sig barrel for the CZ-40B? Did anything ever come out of that?

CZF
March 28, 2003, 05:02 PM
HI, for the CZ40B and the .357 SIG. He used my barrel for
measurements, then the project kinda fizzled out.

If i didn't have a 10mm. i'd be on the .357 SIG bandwagon..
a 75B in .40 with a Bar-Sto .357 tube!

Someday CZUB will offer a .357 SIG from the factory.
Until then, there is Bar-Sto.

DMK
March 30, 2003, 01:31 AM
HI, for the CZ40B and the .357 SIG. He used my barrel for
measurements, then the project kinda fizzled out. Oh, that's a drag. I guess he just didn't see a big market for it. That's a shame, the 40B probably would have been sweet in 357.

Thanks anyway for trying!

If you enjoyed reading about "Anybody have a bar-sto barrel for a CZ75?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!