[Ermac]

Well, just recently I bought a Glock 27 because I wanted a small 40 for when I go in the woods. I shot maybe around 350-400 (if that) thought it using Remmington UMC 180gr and the Winchester WB from Wally World. As I was cleaning it, I noticed a wierd mark inside the "dust cover" of the frame. It looks like the slide made contact with the frame and kinda shaved a small amount of plastic away from the bottom of the dust cover behind the serial number metal strip. It shaped like a U. I know this is kinda hard to write, but if you have a Glock, look at the frame from the top and look right where the dust cover is...look to the back kinda where the recoil rod would sit. It's maybe around 1/2 inch shaped mark shaped like a U. Also, there is a little piece of plastic that looks like it can be broken off (really tiny). I called Glock and the support guy said he never heard anything about it. He said I could send it in if I wanted to. I aplogize in advance, as I do not have access to a digital camera. This kinda freaks me out as the gun is more or less new :banghead: I don't know if this is an issue and should send it in, or if its normal where. I also notice some slide "peening" , but I checked on that and it seems normal for the .40 glocks...I read that on Glockfaqs.com If anyone has any idea's, let me know.
Thanks!

[orangeninja]

I recommend you slowly rack the slide watching for any up down play in it and see if the slide will make contact with the area you are describing. The sub compact 40 is violent little gun, so there should be NO play. As for Glock fixing it, no worries there, they are fast and thorough in fixing their products....kind of like Sig.

[DirksterG30]

Have you tried posting this on Glocktalk.com?

[Ermac]

i just signed up for them today...i just discovered the magical world of gun information forums... :D