[Nightcrawler]

What handguns do you wish they'd make? I have a few.

-Springfield XD in 10mm and .45. Both use narrow, but still double column magazines, so that the .45 holds a full ten rounds without having an excessively fat grip. 4" and 5" models. A 5" XD in 10mm would be SWEET.

-CZ-97 pistol or conversion to 10mm.

-A new CZ pistol, using their modern designs, and very strong, with a 10 round double column magazines, chambered for 7.62x25mm. Or heck, bring back a new, improved CZ52, with an improved grip angle, push-button mag release, better sights, and a less brittle firing pin.

-A 4.5" Ruger "mountain gun" Redhawk revolver, in .44 Mag and .45 Colt. Bring back .41 Mag, too.

-Smith should bring back the 4" .41 Magnums. Seriously.

-Single Column full sized Glocks in all calibers. I don't want one but almost everybody who likes Glocks does.

-Somebody should make a new, full sized, modern pistol in .45 Win Mag. A good hunting semiauto with less weight and bulk than the Desert Eagle.

[Croyance]

A HiPower-1911 fusion.
The trigger of a 1911 on a HiPower body. The low profile safety paddles from a carry 1911, with the positive click on, click off. Good bar-dot or 3-dot Novak-style sights.
I do like the 1911, but dislike the grip safety, and I find the HiPower has a better shaped grip.

I would also like more 10 mm handguns. Most of what is available is a 1911. Only the Glock and Witness, among current production models, are not in the 1911 body. How about a USP, SIG, or Beretta (or CZ-97)? THey would need to handle hot loads.

More .44 Special snubbies that can handle hot loads. More hot loadings would be nice too.

A mass marketed .45 necked down to 9mm. Why? Just because. I do know about the .38 Cassull, but it doesn't seem to have caught on.

[Zundfolge]

How about a Kahr K45 ... or better yet a K10

Also if Tangfolio can make a compact in 10mm, why can't CZ ... I'd go for a CZ75 PCR 10mm

I'd also like to see an HK P7M8 or P7M10 in my safe
:neener:

[arinvolvo]

Id like to see a pocket nine...a REAL pocket nine...something like the rorhbaugh....but without the ridiculous pricetag...I dont want to pay $900 for ANY gun, let alone a pocket gun.

[Feanaro]

I'd like to see an H&K MK23 with a relocated mag release. Put it where the decocker is, place the decocker where the release was. With maritime finish on all outer surfaces.

[arinvolvo]

One more....Id also like to see a DAO Steyr....or as least DA/SA with a decocker.

I dont really like carrying cocked and locked I have decided.

[faustulus]

I'd like a Beretta 92 with a frame mounted safety, extended mag release, brigider slide, skeletonized hammer and the Elite 2 grip. Oh and I would like it in 9mm and imported into the U.S.

[WESHOOT2]

Ruger, make us a GP100 in 10mm (feasible, nay?).

[NJ3]

Id like to see a pocket nine...a REAL pocket nine...something like the rorhbaugh....but without the ridiculous pricetag...I dont want to pay $900 for ANY gun, let alone a pocket gun.

I hope someone like Kel-Tec will makes that gun. Then you know that we blue collar guys could afford it.


I'd like to see a slim Glock 9mm also, similar in size to a Kahr PM9.

[Marko Kloos]

A single-stack HK squeeze-cocker in 10mm Auto.

[Sisco]

A GP100 in either 10mm or 45acp.
Lever action in .41 mag.

[Rembrandt]

Broomhandle Mauser chambered in .22LR or 17HRM....loads from bottom with detachable magazines...

Browning High Power chambered in .22LR....using the same magazine dimensions that could hold 20+ rounds

[DMK]

Oh, let's see, just off the top of my head:

.40 or .357sig CZ-75 PCR
S&W, bring back that lovely blued 45ACP Model 25-2 with the 6 1/2" barrel
A stainless 9mm DA revolver would be nice too for a cheap range gun.
.22LR Walther PPK, or CZ-83.

[Will Fennell]

Springfield XD[regular and 5" Tactical] in 10mm.

CZ75 in 10mm.

Colt Bring Back the DELTA ELITE.....in 10mm of course.

[jmicmic]

Yes, I would love to see or have a 1911 in .50cal. Have a .50ae cut down to .45acp length or right @ .900.

[agony]

A Kahr in .357SIG.

A Kahr in .45ACP.

A pocketable SIG in 9mm or 357SIG; smaller than the 239.

A Blackened Slide/reverse two toned SIG 220ST.

[STEVE M]

A SIG that won't loose it's grip screws

A 3" .357 6-shot with adjustable sights (k frame size)

A SIG 228/229 size 10mm

A Browning HP that I can afford

[stretcharmstrong]

How about an HK P7 in .357 sig that will instantly convert to .40 with swapping the barrel?

[10-Ring]

22 lr conversion kit for the HK USP, a P7MX in 45 acp for less than $2000, the Tactical w/ suppressor in CA, a steel framed Beretta 92fs, a S&W 625 in 45 acp that didn't need moon clips and world peace :D

[ajacobs]

How about an HK P7 in .357 sig that will instantly convert to .40 with swapping the barrel?

p7's have fixed barrels.

[faustulus]

A SIG that won't loose it's grip screws

locktite :)

[Standing Wolf]

I'd like to see a modern, reasonably priced .22 caliber match pistol that's as accurate as the old High Standards.

[cool45auto]

I think the Billenium has most of that stuff.

[Tacblack]

Beretta with frame mounted safety, in 9mm, all black gun LW frame.
More 1911's in other calibers with out having to get SS finish:banghead:

[Stevie-Ray]

Kimber Ultra in 10mm, ported ala SA V-10. 10mm would take full advantage of porting. I'd love to carry this one.

[faustulus]

I think the Billenium has most of that stuff.

The stock combat has most of that, but they don't import them into America. And I would rather have an alloy frame than the steel Bellinium. The B is too heavy.

[Skunkabilly]

A singlestack P2000 and/or USP9C that takes P7M8 magazines.
The 92 Stock or 92 Combat kicked up to full scale production.
92G to come stock with a circumsized barrel.

[Brian Williams]

A new Colt woodsman type 22
A nice polished blue 1911 with out big ugly rollmarks

DA revolvers with easily changeable cylinders 9mm/38 45 colt/ACP

Stock revolvers for IDPA Moonclips and 3 or 4" barrels

A K frame in 9mm with moon clips 4" & 3" barrel IN BLUE with fixed and adjustable sight models

A L frame 5 shot 45 acp and Colt fixed sights

N frame 45 colt fixed sights pencil barrel and heavy barrel

[JOE MACK]

Sisco says:"Lever action in .41 mag."

Hey, you know Marlin now has the 1894FG in .41Magnum out? It's going for just over $400 in most places. Just FYI. RKBA!

[The Silver Bullet 1719]

The CZ 75/85 line in stainless steel (think this is going to be a reality, but not sure)

A .22 caliber Glock

Another squeeze-cocker like the P7, but cheaper to drive its prices down.

[Schuey2002]

A single-stack HK squeeze-cocker in 10mm Auto.
Ditto !! :D

Plus, a Glock 26-sized H&K USP would be on my wish list.

[Boiler_G]

A Colt 1903 hammerless in 9mm. If they made those now I think they would sell like hotcakes!

[Destructo6]

CZ-110.

[T.Stahl]

6" longslide Glocks in 10mm and 7.63 Mauser...
...and matching ~30rd mags.

[Zak Smith]

Similar to what Croyance suggested,

A BHP (Hi-Power) with a titanium frame and a 1911 trigger, Novak night sights, stippling on frontstrap, some black hard-chrome finish.

-z

[Chris Rhines]

What I'd like to see = A pistol with:

- An absolute maximum unloaded weight of 25 ounces.
- Overall length of no more than 7.5" and no less than 6.0", with a barrel at least 3.5" in length.
- A full-length grip.
- At least ten-round capacity, assuming chambering in 9mm or .40.
- A grip no more than 1.1" across at the widest point. No finger groves, palm swells, or thumb shelves.
- A fixed barrel.
- A system of operation that is clean, self-regulating, and highly reliable, that allows for the above-mentioned fixed barrel.
- A single-weight trigger with a crisp, soft break and a very short reset length. Overall trigger travel from rest to firing should not exceed 0.25".
- An ambidextrous manual safety. I've grown used to such things. Make that ambi controls all around.
- No porting. No equipment rails. No grip safties.
- Very strong, all-steel magazines with a friction-reducing coating inside and out.
- As few nooks and crannies as possible on the inside of the gun.
- Full-length slide rails would be nice.
- A small thing - use industry-standard sight cuts. No one will ever agree on The One True Sight, so making it easy to change is a good thing.
- A street price under $700.

- Chris

[Bergeron]

I'd like to see a USP Expert in 10mm,

A P7 single stack in 10mm and .45,

Ex Brown Kobra Carry in an aluminum frame in 9x23

.22 version of the S+W .17HMR revolver,

.22 kit for my USP,

and a Scandium J-frame in 9mm.

That's not too much to ask, is it? :D

[Poohgyrr]

A blued 4" .44 Special, and also a blued 3.5" .357; both on the N frame and by S&W.

And a good blued 4" .45 Long Colt (yes there was a Short Colt).

[Justin]

First wish is easy: Full size CZ-75/85 with rails for attaching a light. This would make for a good home-defense pistol. Graft a 1911-style trigger onto it, and I think I'd be happy as a clam.

Second wish will never happen but I still want it bad:
A modern fixed-barrel pistol chambered in 7.62x25mm Tokarev. Single or double stack, doesn't matter, though I think a double-stack magazine for 7.62x25 would make for an excessively large grip.

Make a matching carbine with a 16-inch barrel and the ability to accept some sort of red-dot scope that uses the same magazines as my imaginary wonderpistol, and I'd buy one of those, too.

[arinvolvo]

Id like to see a 454 casull conversion kit for my Ruger 22/45.:D :uhoh:

[2xTap]

What I would like to see:

1. Colt produce a 5" Series 70 stainless GM in 10mm in the style of the XS Series sans the front cocking serrations.

2. CZ to produce a Bren Ten copy in 10mm.

3. Springfield Armory to offer their entire TRP line in 10mm.

4. Smith & Wesson bring back the 3" barrel 610.

5. Colt bring back the entire XS line (GM, Combat Commander, CCO, Officers Model) all with stainless frames and slides, all Series 70.

6. Colt offer their Defender with a stainless steel frame.

It's not asking for too much, is it? :D

2xTap

[cslinger]

HK P7 in .357Sig.

HK P7 in .45 ACP (I know they made like six or whatever).

Anything with an ambi magazine release. I am a righty but my hands are small and it is easier to manipulate ambi mag releases with my trigger finger.

Chris

[Dr.Rob]

Seriously?

How about a 2 inch stainless 6 shot 45 ACP revolver with moon clips and NO porting.

How about a BHP in 45 ACP?

How about a C-96 copy that is easier to take a aprt and shoot heavy loads in?

How about a return of the auto mag?

How about Colt New Service 44 magnum?

How about a new model of the Pocket Nine?

How about a real Ligtning Clone in 38/357 or thunderer in 44 special or 44/40 or 45 lc?

And why NOT a 1903 Colt in 9mm?

Oh and lets add a Ruger pistol that is sleek like their 22's, rather than iron bricks.

[Berg01]

Kimber Classic or Stainless Target and / or Pro Carry HD in 9mm

A S&W 952 9mm that I can afford,

SW 1911 with match barrel and adjustable sights

Browning HP Standard in .357 Sig

Glock G17 and G19 in .22 rimfire, or a Glock .22 rimfire Factory Conversion

Sig P220 in 10mm

S&W 627 Mountain Gun (non-PC)

[SoDFW Jason]

XD subcompact in .357Sig
Colt Mustang in 9mm

[Bergeron]

Suprising the number of people who want guns in the "dead" 10mm, no?

[Mastrogiacomo]

I'd be happy to see all the guns we can't get in Massachusetts finally given the go ahead for sale here.:scrutiny:

[Kahr carrier]

A snubbie Redhawk and a 45 acp Stainless highpower.:)

[Berg01]

Mastrogiacomo said

"I'd be happy to see all the guns we can't get in Massachusetts finally given the go ahead for sale here."

When Smith & Wesson, a company located in Springfield Mass., cannot automatically get its new products (i.e., SW 1911) approved for sale in the state where it employs people, and pays taxes, then there is something WRONG!

I live in PA, and this situation in Massachusetts still rankles me!

[Alfadog]

I'm easy to please--all I want is a Lightweight Commander version of the new roll mark Colt M-1991A1. Maybe a version in 9x19mm too. Reintroduction of the Service Model Ace would be great also.

I might be able to come up with some ideas for S&W revolvers if they get rid of that stupid key lock and return to hammer-mounted firing pins, quality tool steel internal parts, blued finishes, and square butt frames on 4" and longer barrel guns. Then again, there are so many used S&Ws on the market, why worry about what they are making now?

[Okiecruffler]

I want a new pistol in 7.62X25, maybe something like a downsized 1911. With some good HP ammo that might just make a dandy pocket protector.

[BlkHawk73]

Ruger Bisley, 7 1/2" bbl w/ thier target gray finish, banded front sight, with black laminate grip panels chambered for .41 GNR (. 454 necked to .41) with appropriate case head in place of Ruger medallian on grip panels

re-introduction of the P7M10.

P7 in .45 (t'was the P7M7 wasn't it?)

reintroduction of the Ruger Hawkeye

production of the Ruger XP pistol

Ruger made handgun based on thier No. 1 action

Ruger GP100 chambered for the .38 Super cartridge

[12-34hom]

I love 1911 style handguns.... but

H&Kusp - fullsized - Variant #1 in 10mm.

That would be about as good as it gets.

12-34hom.

[jimbo]

If SIG chambered the P229 for 45 ACP, I would buy 2 tomorrow. The P245 was the biggest disappointment. If it had the dimensions of the 229, it would be heaven.

[Prodigalshooter]

GP100 in 45ACP (6 rounds) 3"/4" barrels
6 shot 9mm revolver (unported thank you) 3"/4"barrels
CZ single stack 9mm (steel frame compact)
CZ .45ACP single stack in 5 & 4" barrels

[seeker_two]

And a good blued 4" .45 Long Colt (yes there was a Short Colt).

Actually, it was a S&W cartridge (.45 Schofield)...:D

I'd like to see:

Ruger P-90/97 in 10mm & .38 Super
Ruger GP-100 in .45ACP & .44SPL (5rd. cylinder)
Ruger MkII/Browning Buckmark in .22Magnum
Ruger Super Blackhawk Hunter in .45Colt, .41Magnum, & 10mm.
Beretta 21/Taurus PT-22 in .22Mag.
Star Firestar single-stack w/ polymer frame (heck, I wish Star would come back PERIOD.)


That's all I can think of now. But it's a good start...:evil:

[caz223]

USP compact in 10mm.
Smith to make a special run of 3 3/4" 657s in their performance center.
CZ97 in 10mm.
5 shot GP100 in .45 colt.

[arinvolvo]

Seeker, I too would love to see a Ruger MkII or 22/45 in 22 magnum...I would alctually love to see MORE autoloaders in 22 mag....

I would really like a mousegun autoloader in 22 mag...but from what i have read, it would be a tricky thing to do.

[denfoote]

I, for one would like to see a 10mm chambering for the P95/97 frame!! :D

[arinvolvo]

An invisible 9mm....

Wait...i suppose you couldnt "see" that one at all.:rolleyes: :rolleyes:

[Griff]

- Another vote for the Colt 1903/08
- A modern top-break Bulldog revolver
- Glad to see the 9mm Taurus revolver, been looking for that for a while, I just wish they'd loose those ports.

[benewton]

10mm USPc, but add optional porting, just in case I ever catch that bug.

[Freightman]

I second the STAR comeback, have a M43 that I love great gun.