I've gotten this thing down and back except for 4 things I believe. How/which way in the most detailed description (if possible pictures) possible, are the sear spring, slide stop spring, trigger lock spring, and hammer spring supposed to go back in? I guess I don't have it all down...it kind of blew up as I took it apart so I couldn't make a mental note of how it all went back together. The exploded "diagram" that doesn't even acuaretly show how things properly go back in, and has a misspelling of the word safety, is worthless. I plan on hashing that out with S&W whenever they get back in the office, but I still doubt they will send me an armorers manual or tell me how. So I call on The Higher Road to come to my assistance!
If you enjoyed reading about "P22 Detail Strip Reassembly" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
January 1, 2003, 10:55 PM
Any information is better than what i have now though, so I'll take whatever is offered :)
January 2, 2003, 03:34 PM
Back to top, and Walther refuses to give me any information whatsoever.
January 2, 2003, 04:05 PM
Off to George's place.
January 2, 2003, 10:24 PM
Walther refuses to tell me any information. Nothing. At all. Local gunsmith has never had one apart before so now I REALLY need everyones help...even pictures of the springs just in their regular places would be good.
January 3, 2003, 07:59 AM
Sentry, I haven't seen a P22 except in pictures yet. I'm sorry but I have absolutely nothing on it. George
January 4, 2003, 11:10 PM
By exploded diagram, I guess you are refering to the one in the P22 owners manual? (page 16?)
January 9, 2003, 12:55 AM
Yes, I am.
August 2, 2006, 08:39 PM
hey sentry i hope u have been able to get ur walther back togather, i have had the same issues and have been trying for about 2 months to reassemble it, with no luck, i cant find diagrams or anything, i have it all reassembled except for the hammer assembly the sear springs and hammer springs are also my problem, any help, pics, drawings, ect. would b much appreciated.
please email me back at firstname.lastname@example.org or just reply on here, thanks , shawn
August 3, 2006, 01:22 PM
Try the Walther forum at rimfirecentral.com. There was a sticky regarding detail stripping and reassembly. Hope this helps.