[Sulaco]

I picked up a used but LNIB MAK-90 at lunch today. It was at my local shop and I got it for $240.00. It has a threaded muzzle and these notches in the rear of the reciever that look like where an underfolder stock would attach. I forget what the markings say but I know it says MAK-90 and the name of some company in CA as the importer. It has a sporter style thumbhole stock.

What I am wondering is, what can I do to it? I would love to replace the ground off bayonet lug on the gas port (where can I get one for a MAK-90?), install a real, threaded muzzle brake and an underfolder stock.

I of course want to stay legal so I need to know what all I would have to do to get it setup this way.

Thanks!

[clange]

Got pics?

If it has the plugged up holes for an underfolder you got an amazing price. You can get underfolder stocks now for pretty cheap, $130 I think. For the gas block, you might want to just have a gunsmith weld up some new tabs, and file them down to the proper shape. It would be cheaper than buying a new gas block and having it installed.

[Sulaco]

I don't have any pics but I can get some up tonight. I was hoping I got a good deal. Where can I get the underfolder stock?

Thanks.

[clange]

Dang, they're cheaper than I thought.

http://www.centerfiresystems.com/miva/merchant.mv?Screen=PROD&Store_Code=CSI&Product_Code=STKUF&Category_Code=AK

I assume those will work with a chinese receiver, but I dont know if theres any part of an underfolder latch that requires a certain thickness of receiver. The chinese receivers are .5mm thicker than everything else.

You could ask over here, its an all AK board..

http://ak47.net/forums/forum.html?b=4&f=64

[clange]

Keep in mind too, when you go with a pistol grip and folding stock you have to play the parts count game. No more than 10 imported parts.

You'll need a G2 FCG from tapco, a US made slant brake for the muzzle, and two more US parts. A quick and dirty way is US mag plates and followers. A better way would be a US made gas piston, and a US made pistol grip OR US made handguards. A place called Ironwood Designs makes both.