Can't get my PT-145 apart..Trick?


PDA






old4x4
January 21, 2006, 05:43 PM
Seems straight forward. With the slide locked back and mag out, rotate & remove the dissassembly pin, let the slide go slowly forward-it should come off. Nope, it goes forward about 3/8" and stops. I would like to clean my NEW toy after a couple hundred rounds!!
Nevermind-I forced it and it was just stuck to the frame....

If you enjoyed reading about "Can't get my PT-145 apart..Trick?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
glove
January 21, 2006, 05:55 PM
Hello
Nice gun you have there. I have the PT140 Pro. The trick to removing the slide is after you remove the slide pin and you are moving the slide foward pull the trigger and it should come off.
Dave Z

Slinger
January 21, 2006, 07:15 PM
Ditto what "glove" said.
When you go to reassemble it be sure to put the flat side of the pin under the spring then rotate it as you push it through the frame. This will save you some :banghead: .

If you enjoyed reading about "Can't get my PT-145 apart..Trick?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!