Tri-Viz by Hi-Viz


PDA






danurve
March 14, 2006, 12:50 PM
For those of you not familiar with this system;
http://www.northpass.com/images/cat_01/Triviz_pic_1_small.jpg

Bought one for my 1300 set-up. The instructions indicate to place the rear sight 20" behind the front on the rib. Ok, well that would place the sight where the barrel begins to contour up towards the receiver. So I emailed Hi-Viz for the scoop, and within an hour got a responce, thought that was great customer service.
-=-=-=-
John,

The angle on the bottom will not cause a problem but you can move the rear closer to the front. We designed the sight to work at a distance of 16" to 20" depending on barrel length.

I hope this will help you with installing your sight if you have any other questions please contact us at HiViz.

Thank You

****

If you enjoyed reading about "Tri-Viz by Hi-Viz" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
If you enjoyed reading about "Tri-Viz by Hi-Viz" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!