Any light bullet loads for .35 Rem ?


PDA






dogngun
June 30, 2006, 02:15 PM
I have a great older (1961) Marlin SC in .35 Rem, and I'm looking for your information on light bullet loads for varmint type hunting at about 150 yards.
I'm thinking of something like 125 grain JHP pistol bullets. Any thoughts/help is appreciated. Thanks.

Mark

If you enjoyed reading about "Any light bullet loads for .35 Rem ?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
m0ntels
June 30, 2006, 02:24 PM
Are you looking for load data or loaded ammo?

Randy

rbernie
June 30, 2006, 03:29 PM
I shoot handloaded hardcast 158gr gas-checked Beartooth bullets in my 35 Rem, but that's as light as I've gone. You might want to as a Mod to move this to Handloading, to see if you get a better response.

hoghunting
July 1, 2006, 12:35 AM
dog,
I have not had much luck going lighter than 150 grs. Accuracy really suffers. I think the lighter bullets don't have enough bearing surface to stabilize.

mainmech48
July 1, 2006, 03:30 PM
I've shot a lot of handloads with .357 revolver bullets through my 336 over the years. Like the others, I haven't had much luck with bullets lighter than 150 gr. I get superb accuracy with Lyman # 358429 cast SWC bullets of 173 gr. in my alloy and the #358156 SWCGC at 158 gr. as well as several 158-180 gr. JHPs. Neither cast nor jacketed stuff under about 146 gr. seems to give groups anywhere near as consistent for me. I don't think it has much to do with twist rate, as the Marlin's is 1-16" just like most .357s. It may have as much to do with the Microgroove rifling and the velocities I've tried for as anything else.

My best groups with the cast bullets come in when I keep the velocity to about 1300 f/s or less. JHPs at about 1700. Neither hold up well accuracy-wise past 125 yds, as they don't have very favorable BCs and lose velocity quickly.

If you enjoyed reading about "Any light bullet loads for .35 Rem ?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!