Removing ACE stock


PDA






charles nutinsky
July 23, 2006, 07:19 PM
Looking for instructions on removing an ACE 7 buttstock and replacing it with either a collapsible or fixed buttstock. Especially need advise, instructions regarding removing the ACE already on.

Thanks for the info.

Charles

If you enjoyed reading about "Removing ACE stock" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rbernie
July 23, 2006, 08:55 PM
Presuming your Ace is on an AR, disassembly is simple - remove the upper screw in the buttplate/buttpad and wiggle the stock rearward until it disengages from the receiver. Be careful not to lose the rear takedown pin detent spring that's being held into the receiver by the stock.

The hardest part is going to be finding a way to slide the neoprene sleeve off the buffer tube so that you can remove the stock. I recommend dripping warm soapy water between the buffer and the sleeve.

If you enjoyed reading about "Removing ACE stock" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!