[Jamisonfkilbride]

Anyone who might be able to help with the reassemble of my Remington 11-48
The two Links coming off the bolt/slide where exactly do they go. There are three indentions behind the trigger assy. A manual would be a godsend
Thx-
JFK

[rbernie]

The Remington 1100 manual will probably get you close - http://www.stevespages.com/pdf/remington_1100-1187.pdf

The parts schematic is here - http://www.e-gunparts.com/images/schematic/0860z1148.jpg

Good luck. Nice shotgun. :)

[BSlacker]

I think you refer to the link struts. They engage the cup at the front of the bolt spring follower. This bolt spring goes back into the butt stock. Hope this helps.:)

[ogive]

Jamisonfkilbride:----
I used to have a 11-48 and still have the instruction folder for it. I have just registered and don't know how we communicate but if you can E-mail me an address, I'd be happy to mail it to you.
ogive :)

[GeorgeR]

You probably have it all back together by now, but if you don't, private message me your postal address and I'll send you detailed instructions. Also, if your bolt spring follower is aluminum, you should replace it with a steel one.

[surfprog]

If someone has an extra copy of the breakdown I would sure appreciate a copy if it's at all possible ? Thanks

[Hud]

surfprog,
Here ya' go
http://stevespages.com/ipb-remington-1148.html
Regards, Hud

[bodiebill]

Anyone have the breakdown and assembly instruction for a Rem 11-48.
I am trying to help a friend who just inherited one.
I have a schematic.
Thanks
Bodiebill

[rcmodel]

It's already been posted by rbernie in #2 in this thread.

What else do you need to know?

http://i81.photobucket.com/albums/j219/rcmodel/KTOG/1224.gif
rcmodel

[calibre]

hi! rcmodel went hunting last week took my son for his first hunt and put my remington 11-48 to the test now the firing pin is broken ,I have striped it down to the breechbolt but now iam lost can you help ? thanks !

[rcmodel]

Brownell's has the parts.
Glend Arms:
http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=21167&title=FIRING+PINS

I believe the 11-48 may use the same FP & spring as all the other recent Remington shotguns:
http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=10775&title=FIRING+PIN&s=27223#27223

http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=10937&title=FIRING+PIN+RETRACTOR+SPRING&s=27391#27391

You just need to drive out the retainer pin in the bolt far enough to get the old firing pin & spring out, and the new one in.

http://i81.photobucket.com/albums/j219/rcmodel/KTOG/1224.gif
rcmodel

[calibre]

hello! rcmodel thanks for the tip on my 11-48 rem got her all back together with a 11-87 fireing pin & spring and works great! I wonder if you can help? me with some info on a 12g shotgun given to me mugica eibar side x side with markings of a bird on both sides & triangle on top barrels with made in spain & nitro proved marking, the gun is in perfect shape , maybe a collectors gun ? thanks !!