question on a 590


PDA






BergaminoCAV
October 4, 2006, 09:06 PM
Ive had my 590 for a while now and I just realized about a week ago that it sounds like somthing is loose in the pin assembly. I have ran snap caps through it and it functions fine, Im just afraid to shoot it now lol, figured Id get some opinions first. thanks in advance!!

If you enjoyed reading about "question on a 590" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
MikeJackmin
October 4, 2006, 09:54 PM
I just picked up my 590 (which works perfectly) and gave it a good shake. I could hear a little metallic tinkling noise in there, which I assume to be the firing pin moving back and forth within the bolt. If that is what you are hearing, it's not anything to worry about.

Grizzley Adams
October 4, 2006, 10:01 PM
it sounds normal to me as well,but if your real worried take it to your gunsmith and have him check it out.but a little rattleing is ok.

BergaminoCAV
October 5, 2006, 09:24 PM
okay thanks! I guess i just never realized it did that before

Ditchtiger
October 5, 2006, 11:26 PM
Don't go to a gunsmith, take your 590 apart yourself and find out how it works. It's not hard to do and you don't need any special tools

BergaminoCAV
October 8, 2006, 10:12 AM
yeah i took it apart last night nothing is wrong with it

shotgunkevin
October 10, 2006, 01:03 AM
I've got a Mossburg 590, bone stock and rugged as an anvil. But a friend purchased a new 500 with the pistol grip only, then installed a Houge stock. The first time he shot it with the new stock, a part in the trigger assembly broke and wouldn't allow the gun to be pumped the last fraction of an inch.
It was the little post at the rear of the trigger that rises up to the safety that broke, and it was just floating around in there. I don't know if he reassembled it incorrectly, or if it was defective fromt the factory. He'd only fired 100-150 rounds through it.

BergaminoCAV
October 10, 2006, 08:05 PM
haha ive put alot more then 150 shells through mine haha, I use my firearms alot haha

1911blaster
November 12, 2006, 03:33 AM
berg, i have a mossberg 590 with the laser site on it i carried while doing armed security, i have had it over 10 or so years, and it has had many thousands of rounds through it over this time, it has rattled since day one.


as for the piece that broke off, its the actual safety, it engages a small area on the bolt, i broke mine off when i put a pistol grip on it with a bolt that was too long, it does not effect the ability of the 590 to work, it just usually wont have a safety!

If you enjoyed reading about "question on a 590" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!