Did the 15 minute AR trigger job


PDA






BAT1
November 30, 2006, 12:05 PM
This has been going around, and it works and it's free. It definitely lightens the trigger pull.
www.sargenthome.com/15_Minute_AR_Trigger_Job.htm It's almost like a 2 stage with a crisp pop. Follow directions and Happy Holidays especially to the guys in uniform. :cool:

If you enjoyed reading about "Did the 15 minute AR trigger job" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Soybomb
November 30, 2006, 05:36 PM
I've seen that before but it made me a little nervous from a reliability standpoint. Glad to hear it works!

Bartholomew Roberts
November 30, 2006, 05:43 PM
The key to that is not to polish through the hardening (which is usually very thin on most AR triggers). I am also not a fan of clipping one leg of the hammer spring either.

One real simple change you can do that benefits almost any AR trigger immediately is to use tight fitting trigger and hammer pins that are polished.

If you enjoyed reading about "Did the 15 minute AR trigger job" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!