Where can I find pistol racks for my safe?


December 26, 2006, 06:09 PM
I'm looking for the bent wire, rubber coated racks that hold 6 pistols upside down on a shelf. I thought Midway carried these, but cannot find them listed. Anyone know where I need to go?

If you enjoyed reading about "Where can I find pistol racks for my safe?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
30-40Krag dude
December 26, 2006, 06:13 PM
got mine here...


MSgt B
December 26, 2006, 10:02 PM
I saw a post on this forum where someone used wooden thread spools on the door board of his safe to hold pistols. (Try Ben Franklin's or Michael's)

It was very nice looking (he posted pictures) and looked very easy to set up.

I was thinking of trying it myself.

Ask around.

MSgt B
December 26, 2006, 10:05 PM

It was Gixerman1000. check out his post on this thread.


December 26, 2006, 10:16 PM
I got a couple of the nice heavy gauge vinyl coated six pistol racks at Bass Pro Shop. They were $25 a piece. They were purchased in store in Denver.

December 26, 2006, 10:45 PM
Walmart/Home Depot, etc. Go to the housewares department or possibly hardware and buy some cup holder hooks. Or a set of vinyl clad all purpose hooks. The other thing you could do is mount a hunk of peg board and use the hooks that go into that. Buying anything that is made to sell to shooters drives the cost up. A hook is a hook.

December 26, 2006, 10:50 PM
Well, I finally found the ones I want.

Spreadfire Arms
December 26, 2006, 10:52 PM
versatile rack company:


December 26, 2006, 10:58 PM
The 6 gun racks I got for $25 a piece at Bass Pro Shops are the Versatile racks mentioned in the above post. They are very nice. I just checked the cabela's link and it looks like those are the Versatile racks also. You will love them.

December 27, 2006, 12:31 AM
This is a different style than what you asked about, but I have one of these racks and like it fine.



December 27, 2006, 03:46 AM
Hows about nicely made, custom ones........like these.


The guy is a member of S&W Forums......great guy.





December 27, 2006, 06:59 AM
I have a couple of these..


December 27, 2006, 07:03 AM

Those are nice but YIKES....thats some serious money for something that only holds 3 guns......I would need like 10 of those.

Dr. Dickie
December 27, 2006, 07:21 AM
I just went to Office Depot and got some of those plastic "folder holders" that can sit on your desk.
They looke like this: I_I_I_I_I_I
A pistol (1911) fits right in there nice and snug (i even have a towel around each one). That sits on the top shelve of the safe and holds about 8 pistols.

December 28, 2006, 02:15 AM
Dr. Dickie,

I have to admit thats what Im using as well. I have some nice 3M anti-static matting on a roll that was given to me from a 3M employee. I cut a piece to lay under the folder holder.....then I just lay the guns in them like they were folders.

Works very well and nobody has even noticed that they werent pistol racks.

December 28, 2006, 09:57 AM
One drawback to the models that store pistols with the barrel pointing up: They may not fit on the top shelf of your safe in that configuration.

Snubbies will be fine, but longer barrels will require a lot of room.

I was about to buy that style when the seller warned me to measure for fit. Had to go a different route.

December 28, 2006, 10:12 AM
I too have the Versatile 6 gun type....I love it!!!! Not cheap, but its great quality.

December 28, 2006, 12:16 PM
If your handguns have optics mounted, this style www.hyskore.com/modular-pistol-rack.htm works very well.

I bought mine from www.midwayusa.com


December 28, 2006, 01:24 PM
I did the Pegboard with the hooks in my gun cabinet. Each Pistol/revolver hung by the trigger guard. Looks organized and real handy to adjust to new guns of different sizes. With or without optics and BBL lengths.

Have had zero problems of marking, damage, or ? Use 1/4 pegboard with 1/4 hooks/wire pegs, makes a strong setup if so inclined.

12 or more handguns on a piece 18 X 24 inches. The pegboard can be decorated to taste and or framed to suit. YMMV.

December 29, 2006, 09:22 AM
I went to Lowes and bought a Pot Lid Rack in the kitchen department. Only costs about $10.00 and holds 9 handguns very well. It is made of plastic coated heavy duty wire like a dish drainer rack.

December 29, 2006, 09:50 AM
Some types of "desktop letter holders" with dividers also work quite well for this.

December 29, 2006, 01:00 PM
I bought one of the heavy duty rubber coated dish racks at Walmart. Cost was $6, works well.

January 26, 2008, 09:17 PM
Check this thread. The link is to page 4 look at post *81.


January 26, 2008, 09:22 PM
double post

January 26, 2008, 10:25 PM
I think this is the one you are looking for.


January 26, 2008, 10:44 PM
Got mine at Sportsman's Warehouse near Harbison.


January 27, 2008, 04:17 PM
I went to Lowes and bought a Pot lid rack. It is 12" long, holds 9 guns (1 more at the very end), It is made of vinyl coated heavy duty wire like a dish drainer. Works like a champ and only cost me about $9.00 and change.

If you enjoyed reading about "Where can I find pistol racks for my safe?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!