What type of light for 550B

I have a nice workbench setup in my garage where I reload .40 and 9mm ona Dillon 550B. For lighting I have a 200W light bulb and two 40w flourescant bulbs lighting my bench. The problem I am having is I would like to find a very small light to mount next to my 550B so I can see in my cases better. I have looked around at Menards, and Walmart but haven't found any lights that are small enough to stay out of the way.

Does anyone have any recomandations??

I have Chinese/E-Bay knockoff of one of these:

http://www.amazon.com/Dremel-50FL400-FL400-Flex-Light/dp/B0002QZ1Q0/sr=8-1/qid=1168557424/ref=pd_bbs_1/105-0722987-7664429?ie=UTF8&s=hi

Its a super bright light. I have mine mounted on a sheet metal "lip" on the strong mount.

That looks like it just might work. Thanks

I use the same light on my Hornady progressive to shine into the case after the powder is dumped.

I use one of these. I know it's not on a 550 but I think it would work on just about any press. I got it at Grainger.
Rusty

http://www.thehighroad.org/attachment.php?attachmentid=51010&stc=1&d=1168481709

http://www.thehighroad.org/attachment.php?attachmentid=51011&stc=1&d=1168481763

http://www.thehighroad.org/attachment.php?attachmentid=51012&stc=1&d=1168481802

I'm using one of those Halogen desk lights with a really long flexible neck. (got it at Office Depot). It allows me to position it for whatever I want to keep an eye on. If it's cold in the basement it has the added benefit of keeping your hands warm. :) It's useful for other things as well so I'm pretty happy with it. I do like these little LED's I'm seeing though so I might have to try one of those out.

Have a good one,
Dave

I use a DeWalt "snake" light.

As mounted on the bench near my 550 here:

http://mauser98.com/bench2.jpg