[RH Factor]

Does anyone make a shroud that I can add or remove for my 637. If not I think I might take a mm. or two off the hammer.Thanks

[coltjeeper]

http://www.wallerandson.com/

Go to the on line catalog section, then down to the hammer shrouds.:)

[RH Factor]

Thanks ColtJ

[Dot_mdb]

I just came across this at CDNN.

http://www.cdnninvestments.com/rubklrounlig.html

For $4.99 it might be worth a try.

Bill

[VictorLouis]

Dot, those Bianchis are for a larger frame than his gun, which is a J-frame. I understand, however, that those same grips were at one time made for the J-frame, though I've never seen a pair.

[EJ]

You can often find 'em on e-bay -- though the K frame models are more common--usually for around 6-12 bux--
They're called Bianchi Lightning grips--
They're great on the K and J frame --
Arnold used a set on a model #36 or 37 in Eraser--

Here's one for K RB--

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3612336390&category=39425

[popeye]

Here's one on a 36 on Gunbroker. Seller wants $225. A bit high I think. But pic demos grip on J-frame.