R.W.Dale
April 4, 2007, 10:15 PM
Another thread got my curiosity up and perhaps we could pick up some good ideas along the way by seeing how other people do things.
1 Charge the pan to slightly underweight with the UNIFLOW
2 Place pan on scale
3 trickle up to charge
OR if I'm using a load that I've worked up previously that isn't a MAX load I'll measure directly from the uniflow to the case and not weigh individual charges
And as a safety check use the cheap digital scale to double check my setting up of the balance scale.
http://i3.photobucket.com/albums/y96/krochus/HPIM1297.jpg
1 Charge the pan to slightly underweight with the UNIFLOW
2 Place pan on scale
3 trickle up to charge
OR if I'm using a load that I've worked up previously that isn't a MAX load I'll measure directly from the uniflow to the case and not weigh individual charges
And as a safety check use the cheap digital scale to double check my setting up of the balance scale.
http://i3.photobucket.com/albums/y96/krochus/HPIM1297.jpg