[BergaminoCAV]

Okay so I got a new barrel for my WASR 10 and it came in today...the only problem is, how the heck do i get the old barrel off???

[Cliff47]

I would suggest a bit of penetrating oil where the old barrel threads into the receiver. Gentle application of a wrench, with proper padding, to unscrew the barrel. May take multiple applications, and some time to penetrate.

[Hoppy590]

are wasr's threaded barrels or pinned in the trunion?

[BergaminoCAV]

pinned, definatly not threaded

[Hoppy590]

can be done with a punch, hammer, and vice. probibly gunna need access to a press though. i donno much about the WASR's but if they are anything like thier Rommy G cousins they may fall to nothign short of a 20 ton press

if you manage to get the pinn out with out a press. you can use an automotive gear puller to push out the old barrel and the "all thread" method to press in the new barrel

[MD_Willington]

You're going to have to pull the front trunnion from the receiver, and press the barrel and trunnion apart.

[BergaminoCAV]

looks like ill have to find a gun smith...that will be a pain where i live

[MD_Willington]

Did a bit of searching for you... Final assembly guide, should help.

http://howtobuildanaktyperifle.com/final_assembly_of_the_rifle.htm