HELP...disassembled a used Walther G22 how to reassemble ...


PDA






usp9
June 30, 2007, 07:52 AM
How does the bolt catch lever and spring fit back together in the reciever? Also, the mag release button feels different. Does something fall off that too when you disassemble? I didn't see any extra parts. Just put $300 into a used gun for my son and I can't figure out from the manual how things fit back together.:banghead:

If you enjoyed reading about "HELP...disassembled a used Walther G22 how to reassemble ..." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
ec-10
June 30, 2007, 12:22 PM
The parts list I have for the Walther G22 is lost in the pile of papers on my desk so I am not sure which part you are referring to. Maybe these will help.

This is the lever that keeps the rifle from firing without the magazine being inserted.
http://www.smugmug.com/photos/168051611-M.jpg

This is the lever that holds the bolt open when the magazine is empty.
http://www.smugmug.com/photos/168051641-M.jpg

Left side internals.
http://www.smugmug.com/photos/168051673-M.jpg

Right side internals.
http://www.smugmug.com/photos/168051714-M.jpg

Close up of the mag release.
http://www.smugmug.com/photos/168051751-M.jpg

Let me know if you need a picture of something else or further explanation.

Medusa
June 30, 2007, 01:26 PM
for the mag release check how tight is the stock screw. i found out that screwing it too tight will get the mag stuck - pressing the button felt peculiar and mag was stuck. i fixed it by relieving the pressure to the point where everything started to work normally.

My advise - don't disassemble it, you can clean it with boresnake or flex-rod, small parts are true PITA.

usp9
June 30, 2007, 07:42 PM
These posts were of great help and solved my problems. Thanks for the help. My son shot it today and loved it. He's a lefty and this is his gun.

If you enjoyed reading about "HELP...disassembled a used Walther G22 how to reassemble ..." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!