lube points on wasr-10


PDA






redman900
July 24, 2007, 10:40 PM
I'm new to the ak clones where do you lube on the wasr-1o?
Do you lube the bolt,or like the sks don't?
thanks

If you enjoyed reading about "lube points on wasr-10" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
dfariswheel
July 25, 2007, 12:18 AM
Lubrication points are somewhat a matter of personal preference.


Personally I lube:
The "tail" of the bolt where it slides into the hole in the bolt carrier.
The locking lugs on the bolt. (Grease)
The rails of the bolt, and where they ride in the receiver.
The front face of the hammer. (Grease)
The contact points of the hammer "ears" that slide under the trigger. (Grease)
The front "hook" area of the disconnecter. (Grease)
The "stem" area of the bolt carrier behind the gas piston.
The recoil spring and guide.

Grease works well since it doesn't dry out or evaporate, wash away, run off, sling off, or wick away. It stay put and lubricates.

If you enjoyed reading about "lube points on wasr-10" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!