22-250 Load Data
Twud
September 28, 2007, 01:39 PM
I'm looking for load data for my 22-250 shooting 36 grain Barnes Varmint Grenades. It seems like Varget is a good place to start.
Thanks,
Mark
If you enjoyed reading about "22-250 Load Data" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
YankeeClipper
September 28, 2007, 09:57 PM
My favorite is a 52 gr HPBT 33gr IMR 4895. I know that isn't what you asked for but now you have my 2 cents.
ping
October 6, 2007, 09:35 PM
I use 52gr sierra hpbt with hogdon 380. I shoots amazingly well. I know when you get down to 36gr or so the bullet can disentegrate due to velocity. Have to be careful on that. Anyway like the other thread this is probably not what you wanted.
Doug b
October 7, 2007, 09:09 AM
Twud this months Handloader mag. has an article on the varmint grenade showing loads for .223 & .22-250.
dennisH87
April 10, 2008, 06:16 AM
i loaded some and as far as accuracy goes i got about .5MOA out of my .22-250 at 100 yards with varget. i ended up using the load data for my pet load which is a 40gr v-max but i used varget powder. I dont remember what the weight was for varget but i used 39.6gn of H380 but havent shot those yet. i seated them .020, .010, and .005 off the lands. as i suspected accuaracy got better and better the closer i go to the lands. the best ground was loaded to .005 off the lands. hope this helps.
If you enjoyed reading about "22-250 Load Data" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.