Bisley grip frame--source?


PDA






Weylan
January 9, 2003, 03:32 PM
I've a stainless Ruger Vaqero with the standard grip frame, and have read that it is interchangeable with the Bisley. I checked Ruger's catalog, but didn't see anything saying you could buy a Bisley grip frame by itself. Is this possible? Or, is there another maker of aftermarket stainless Bisley frames you can order from? Thanks for the help...

If you enjoyed reading about "Bisley grip frame--source?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
JoeHatley
January 9, 2003, 04:03 PM
You can order direct from Ruger or go to www.brownells.com

Good Luck...

Joe

Koveras
January 9, 2003, 06:21 PM
Brownells sells a kit with the Bisley frame,hammer, trigger, and other assorted original Ruger parts. But the frame is oversized and it can take some time and patience and elbow grease to fit it. It took me the better part of a weekend to get mine in place.

Also, although the hammer and trigger are supposed to be drop-in, I had a problem with the pawl needing fitting as the cylinder engaged the stop long before the trigger engaged the hammer. Once again, that fitting was easy, but required time and even more patience (especially since I ordered a new pawl so I could restore all the original parts if needed).

Jim March
January 10, 2003, 01:46 AM
We have a thread going that started on TFL and continues here on THR covering aftermarket Ruger SA parts and upgrades.

http://www.thefiringline.com/forums/showthread.php?s=&threadid=80872

When you get to the end, there'll be a jump link to the THR portion of the thread.

If you enjoyed reading about "Bisley grip frame--source?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!