Speedloaders


PDA






KMKeller
January 9, 2003, 05:14 PM
Okay, I realize that I'm driving everyone nuts with my new purchase, but the next question looms on the horizon:

What speedloaders to you kind folks recommend for a J frame 5 shot S&W revolver?

Thanks again,

Kirk

If you enjoyed reading about "Speedloaders" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
BLiTzNicK
January 9, 2003, 05:25 PM
I like the HKS. I think the model number is 36A. It holds the rounds securely, and releases them with a simple twist.

LWCmdr45
January 9, 2003, 05:45 PM
I can only think of three "speed" methods of carrying spare ammo for a J-frame: the HKS speedloader, the Safariland Comp I speedloader and the Bianchi Speed Strip. Taking into consideration that I use my J-frames as BUG's, I like the Comp I for pocket carry when I'm using a covering garment with side pockets, but usually just stick a Speed Strip in my pants pocket.

Steve

trapshooter
January 9, 2003, 05:56 PM
I used the HKS with my M36 Smith. One thing to remember is to check function if you have oversize grips. Speed loaders may not be so speedy in that case.

ruger357
January 9, 2003, 06:33 PM
Plan on picking up a HKS when I get my 649 next Friday.

Prof
January 9, 2003, 07:33 PM
Safariland work best for me: easier to release than having to twist. Both are good speedloaders.

M58
January 9, 2003, 07:52 PM
I vote for the speed strip.
Flat...

GoldenLoki
January 9, 2003, 07:58 PM
I like Safariland Comp I for speed and ease of use. But they are lumpy, not convenient to carry, so get left home a lot.

I like Bianchi Speed Strips because they are flat and easier to conceal. But they should be called Bianchi Convenient Carry strips, cause they ain't speedy:p They also get left home a lot because pockets are full of change, keys, billfold, and a S&W 360.

I most often end up carrying extra ammo, when I carry extra ammo) on a belt slide.

http://goldenloki.com/guns/smith/360SC.JPG

GL

Vern
January 10, 2003, 07:18 AM
I've always preferred the S.L. Variants for my 5 shot and my 7 shot. Similar to Comp III's, they require a "push" to load versus the "twist" of the HKS loaders.

The angle that the round sits in the loader can be adjusted for fine tuning.

They're pricey, but I think they're worth it.

Speedstrips work well and carry pretty easy in a pocket.

Anthony
January 10, 2003, 12:07 PM
I use both with my J's.

Safariland's if I need to manipulate the loader with my left hand.

HKS if I can use my preferred right hand method.

Of the two I prefer HKS overall for their durability. Not that the Safarilands break easily, but the HKS's are that rugged.

That said, Bianchi Speedstrips are my most commonly used loading device for these little wheelguns.

- Anthony

VictorLouis
January 11, 2003, 09:20 PM
I don't find the Comp I to be too bulky for pocket carry even in jeans. I prefer it to the HKS by a wide margin. Of course, the Bianchi Convenient to Carry Strip is always on-hand, also.:D

MJRW
January 11, 2003, 09:30 PM
I have more faith in the HKS speed loader. The thing I like best about revolvers is reliability. It doesn't seem quite right to me that I have an EXTREMELY reliable revolver but I might conceivably have these 6 or 12 or 18 extra rounds and they're stuck in a speed loader. I know it ain't likely, but it just doesn't sit right with me.

Prodigalshooter
January 12, 2003, 11:15 AM
The Safariland Comps are very user friendly, just push down into cylinder and they pop free, no twisting. They are also a bit shorter than the HKS model. But the HKS is a good unit, just a tad slower, IMHO.;)

WESHOOT2
January 12, 2003, 11:37 AM
I have never had a (dropped) HKS drop loaded cartridges. Slower, but IMNSLE more reliable for social carry.

Racing only? The Safariland Comps are faster.

NEon
January 12, 2003, 11:59 AM
Speed strip. Anything else is alot of bulk for that kind of carry for me. Speed strip is nice for reloading only one or two rounds, however, to each his own!

If you enjoyed reading about "Speedloaders" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!