Which small fixed blade?


PDA






prhm
January 9, 2003, 11:08 PM
All of the knifes I currently carry are folders. I would like to try a small fixed blade. I think I want a 2 1/2 to 3" blade and would like to stay in the $70 range. Whadda ya think? Thanks in advance.

If you enjoyed reading about "Which small fixed blade?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Tamara
January 10, 2003, 12:12 AM
Well, the Benchmade Nimravus Cub is mighty cute...

Lone Star
January 10, 2003, 08:10 AM
If you want something THAT short, try the Fallkniven WM1. Check www.fallkniven.com

Lone Star

SADshooter
January 10, 2003, 10:01 AM
I have a CRKT Polkowski/Kasper Companion. It may be a bit long for your requirements, but I'm not sure.

hso
January 10, 2003, 03:10 PM
What do you want to use the knife for? This will dictate blade materials, profile and length as well as handle specifics. How do you intend to carry it? This will influence sheath materials.

Chris Rhines
January 10, 2003, 03:40 PM
My current FB carry is a CRKT Ryan Plan B. It's very cute, and if you can't find one for under $40 you ain't trying very hard...

- Chris

AnklePocket
January 10, 2003, 07:14 PM
I think that Columbia River is about to come out with a Corkum 1st Strike. It'll probably have a 4" blade, though, but very very cool. I think that they may also have a version of a Bud Nealy Knife coming out as well that should be smaller. Probably'll be introduced at the SHOT Show.
Sorry, the Nealy's not a fixed blade. Here's a good one:
A used Strider SA, DB or MFS. They appear from time to time at www.bladeforums.com in the Exchange section.

hso
January 10, 2003, 07:18 PM
CRKT's F4 designed by Kit Carson may be what you want

Knife: Overall length: 5.50” (14.0 cm)
Blade: Cutting edge: 2.50” (6.4 cm)
Thickness: 0.10” (0.25 cm)
Steel: AUS 6M, 55-57 HRC
Weight: 1.3 oz. (37 g)

F4 Convertible Sheath: (included with knife)
Material: Black Zytel
Clip: 180 degree reversible and removable
Length: 3.87” (9.8 cm)
Width: 1.62” (4.1 cm)
Weight: 1.4 oz. (40 g)

I've got one of Kit's and one of CRKT's. They are nice little, emphasis on little, knives. Most everything else I could find was 3.5 inches or much more than you want to spend.

Surprisingly, there are some handmades that are in your range for size and price, but I can't attest to their quality.

AnklePocket
January 10, 2003, 08:25 PM
Very good call on the F4. Also, Outdoor Edge might be coming out with a Blackwood knife called the Mini Melee, maybe. That would rule.

prhm
January 10, 2003, 09:00 PM
I plan on using the knife for everday chores, so it could be cleaning a steelhead one day and cutting tape the next.
The main reason I am looking for a small blade is to keep the overall legnth down. I work in a paint store so I dont want to scare the little old lady buying house paint when I pull out a knife to open a package for her.
I checked out the F4 like suggested, it lookes like a nice little knife. I dont know anything about steels though. Is the AUS 6M good? Eventhough I said in the 70 range, if I can get a much better knife for a little more investment I'm not against it.
Thanks for all the great responses.:)

Kingcreek
January 10, 2003, 11:55 PM
Should be alot of possibles in that range. spend some time over at bladeforums.com
You could probably get into a small custom for around $100 or maybe even less. D2 steel would be a good choice.
I like a fixed-blade knife that size carried in an inside-the-pocket sheath.

hso
January 12, 2003, 09:38 AM
http://www.bladeforums.com/forums/showthread.php?s=&threadid=237578

I started this thread over at BF as your question had made me curious about sub $100 knives made outside of a factory setting. Most of the responses are $100+, but the information is still very good.

Take a look at Gene Ingram's knives - http://www.geocities.com/porchswings/moreknives.htm

John Greco is known for making lots of knives as inexpensively as possible that stand up to lots of abuse. I've got several that have been purchased for under $100.

Al Thompson
January 12, 2003, 03:20 PM
These seem to be very good knives. Several friends have them and like them.

http://www.anzaknives.com

Price is in your budget too.

Ron L
January 12, 2003, 04:07 PM
Sounds like you're almost talking "neck knife" territory here. Do a search in

Blade Forums.com (http://www.bladeforums.com)
Custom Knife Directory.com (http://www.customknifedirectory.com)

There are tons of options in this category. Anything from bare steel grips to many various types of scale material is available. Also consider various methods of carry. If you'd give us all a few ideas that you're interested in, we could steer you even closer.

Otherwise, you may also consider a Kelgin Paula. I'm picking one up from my brother as a gift for my son. It's a great little knife.

Kelgin Paula (http://www.kelgin.com/styles.html#Paulas%20Hunters)

deputy tom
January 12, 2003, 08:12 PM
prhm,go to Wal-Mart and buy a couple Shrade Sharp Finger knives.They are the best fixed blade buy for the money.If You don't believe Me check out Fred Perrins review in the provided link below.tom.

http://www.geocities.com/Hollywood/Set/2292/schraderev.htm

deputy tom
January 12, 2003, 08:14 PM
OOPS! double tap.tom.:o

cratz2
January 13, 2003, 11:47 PM
Yeah, I carried one of two Anza knives for several months. Mostly scraping and light cutting duty but used multiple times every day. You can tell they've ever been used. Very solid knives for the money though one fault that comes to mind is the very light laminated wood lends an aura of 'cheap' to them that the older Anza knives don't have at all.

Still, ANY size is available for a very reasonable price. I've bought all mine off eBay. I think I have about five or six.

PUMC_TomG
January 14, 2003, 12:21 AM
I occassionally carry the CRKT 4" Komodo... held up pretty well... especially if you've seen the crap I've done to it! :uhoh: :D

I also second the Nimravus Cub, but I would also recommend the Benchmade River Rescue. Awesome knife.

CWL
January 14, 2003, 07:03 PM
Take a look at TOPS Knives.

http://topsknives.com/products_pages/productdetail/scalpel.html

Street Scalpel. Ground from 1/4" SS billet. 2 3/4" blade. Neck or clip attachment. Only $39.00

Great people to deal with, only company I've ever gotten a handwritten "thank you" card with order!

Guyon
January 24, 2003, 02:25 AM
You know what? I was thinking Schrade as well. But not Old-Timer Sharpfinger (1095 carbon), but rather Uncle Henry Wolverine (Schrade+ stainless). Runs about $35.

While the carbon will hold an edge longer, the stainless is just way less maintenance, looks better IMO, and it still keeps a nice edge. The Wolverines were hard to find for a while, but I've seen them in Wally World recently.

A little nicer would be the Spyderco Moran. Features some excellent VG-10 steel. Great knife in two blade styles with a very cool kydex sheath set up for a whole host of carry options. Runs about $50-$60.

You might also check out the Camillus CUDA neck knife in D2 over at AG Russell Knives. The only problem with it is that it doesn't have scales. I had a fellow put some nice G10 scales on one of these CUDA knives. Turned out great. The D2 CUDA is $50.

Here's a pic of a Spydie Moran and a Schrade Wolverine.

If you enjoyed reading about "Which small fixed blade?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!