cobra derringer


PDA






dirty dave
November 20, 2007, 01:39 AM
Just wanting to know how to liten the trigger pull on one of there derringers.Have not taken the grps off yet just thought I would ask here first.thanks,I know its not much gun spare me that.

If you enjoyed reading about "cobra derringer" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
markk
November 20, 2007, 05:57 AM
Why, 35 lbs is too heavy for you?







Just kidding.;)
I wish I knew.

dirty dave
November 20, 2007, 10:42 AM
I wish it was only 30 lbs.Guess I could give it to my son he works out alot.

Joe Demko
November 20, 2007, 11:21 AM
You could try loading it with snap caps and dry firing the crap out of it. If yours is put together the way I remember a friend's, it's held together by rivets and doesn't lend itself to disassembly. You could try squirting some kind of mild abrasive (like toothpaste) into the lockwork to speed up the smoothing process while dry-firing. I'm thinking here or the stamped steel models that they sell chambered in .45LC/.410.
If you have one of the ones that's a replica of the old Remington derringer, they are made out of crap metal and there isn't much that can be done with them.

dirty dave
November 20, 2007, 01:02 PM
.Going to put some valve grinding compound in it and dry fire it .I dont think it can hurt it.

tank mechanic
November 20, 2007, 02:37 PM
I have a Cobra 9mm deringer. Instead of pulling straight back like a normal trigger, you put your finger on the top of the trigger and pull down. It still takes some muscle but it is a lot easier to pull the trigger.

dirty dave
November 20, 2007, 03:11 PM
After working with it.I took out the hammer and polished it to mirror finish,greased it up and it works great.Have no problem now.

If you enjoyed reading about "cobra derringer" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!