[ReconTech]

I want to see everyone's ARs, customized or whatever...and point out any "inexpensive" mods it may have...

[Jack19]

I'm not much for making rifles look like Swiss Army knives; the only mod I made was to change out the grip for an Ergo Grip. I think it's much better than the original. About 21$. Might hang a light off it one of these days, but I'm sticking with a Surefire against the receiver for now.

Sorry, no pics of my rifle, have a little rule about that, but here's one from Ergo Grip's site...

http://www.ergogrips.net/~shines/smEgAR.jpg

[ReconTech]

Thats what I have been looking for, is a good grip...haven't decided which yet...but I don't like the stock one very much.

[LRRPS]

http://burns.thefinaldimension.org/contrib/navigator/usa.gif http://burns.thefinaldimension.org/contrib/ed/BlueFlagRocket.gif

Sorry, can't delete this post.
Pls. check out the same post below.
Thank you.

[crewzer]

I think it has everything on it that I need. Anything that I might have left out?http://www.azgoodguys.com/ebay/swissarmy.jpg

[BusMaster007]

LRRPS: :D That's perfect. It speaks "2nd Amendment". Nice rifle.

[BusMaster007]

Oh, yeah...pix!

BusMaster's Bushmasters:
"Post Ban" V-MATCH & "Pre-Ban" Dissipator.

The Dissipator has the Vortex flash suppressor for now, plus the Redi-Mag magazine holder.
The scope/mount/cheekpiece is there for enhanced vision if needed.
That's an old Redfield LoPro Widefield 3-9 w/AccuTrac.
The front sight is a KNS hooded crosshair.

The V-MATCH uses a NIKON 6.5-20x44 on the B-Square mount with their bubble level and bipod.
I have Hogue grips/forend on both rifles now.
The TeleStyle stock on the V-MATCH was used in transition before I got the second lower, so I kept it.

A note of interest is that the AR15.com/ArmaLite 2003 Special Project rifle I'm getting will also wear the TeleStyle stock, only in green. I managed to find a Hogue grip in green, also.
The 3 rifles will have a consistent look and feel, anyway.

[RussB]

here's my Rock River Arms "Tactical CAR UTE".

When she first came home...

http://www.imagestation.com/picture/sraid64/pee204a7de61eff8c0f5cfb3de95990b1/fc01b246.jpg

And now, with an Aimpoint ML2 (with aimpoint mount) ACE ARFX stock, and a Magpul grip...

http://www.imagestation.com/picture/sraid71/p286dd473093ecb4d838b1e4b99583d6e/fb910c6e.jpg

[LRRPS]

http://burns.thefinaldimension.org/contrib/navigator/usa.gifhttp://instagiber.net/smiliesdotcom/contrib/edoom/ALD.gif


Here is my M16 family

[uglygun]

http://home.bak.rr.com/varmintcong/ar10/ar10a4.html

[Gewehr98]

Preban Colt Competition HBAR:

http://mauser98.com/hbarsmall.jpg

[veloce851]

I'll bite-
This is my first AR... Armalite NM 20" upper on a RRA lower
I put the cord on the stock to act as a cheek rest. Till I can afford one.
I'm not happy with the faux car stock. So I'm looking at the ACE stocks.
I added the PSG1 style plamrest grip which I use without the rest most of the time. It was an impulse buy at a gunshow. But still tons better than the stock grip. I'm planning on getting either the 1911 grip conversion with a hogue rubber finger groove slip over. Or the Ergo grip.
The scope is an NCStar 3x9 lighted retics. The sling on it sux and was another $6 impulse buy. I'm shopping around for one I like.
http://www.thehighroad.org/attachment.php?s=&postid=401067

[veloce851]

with the palmrest
http://www.thehighroad.org/attachment.php?s=&postid=401076

[Kamicosmos]

Here's my Bushy Varminter:

http://www.kamicosmos.com/Firearms/varminter/varminter1a.jpg

[RustyHammer]

They're playing my song!

:D

[Zundfolge]

My AR15 is still in transit (I figure the upper will get here today or tomorrow and the lower, hopefuly by the end of the week).

I photoshopped together a couple of pics from the RRA web site to show what mine will look like.

http://www.thehighroad.org/attachment.php?s=&postid=397061

Its a RRA 16" A2 upper w/SS barrel on a standard RRA A2 lower.


Boy I can't wait!

[mjc1677]

Here is mine. LOVE IT!!!!!!!!
http://us.f1.yahoofs.com/users/3f0ce3a5_6b36/bc/Gun+Pictures/XMG4.jpg?bcuYtJ_A38EQbN7c

[Bartholomew Roberts]

http://www.ont.com/users/kolya/AR15/AR15.jpg
http://www.ont.com/users/kolya/AR15/AR15_2.jpg

Bushmaster 16" HBAR 1/9 pre-ban
Sierra Precision Grip
PRI Gasbuster
Trijicon TA11 ACOG on ARMS #19S mount
RRA Enhanced Stock
Colt M4 Handguards
ARMS #40 folding rear sight

[tango3065]

Tlaking about grips I'll tell u guys what I done to my bushmaster that feels great. Take some pachmayr pac-skin and wrap one layer completely around it, its nice.

[Newt]

Kamicosmos says: "Hey honey!!!... you seen that black velvet blanket layin' around here anywhere?" ;) :D

That's a sweet gun though.

Newt

[HankL]

I drug this one out. http://www.imagestation.com/picture/sraid71/p4994c9d2c72bec419e1c3a0a502a5cab/fb895608.jpg
Colt Delta HBar. I bought it new, put on the leather sling and fired it 60 rds. Not the best investment I ever made.

[uglygun]

Love the Sierra Precision Rifles grips, got one on my AR10 and on my accurized varmint rifle. BIG meaty grip that helps fill out my wookie like hands not to mention really makes target shooting a comfortable experience.

For my regular use AR15s I have Ergo grips on both of my two Bushmasters, like the filled in backstrap area that closes the web of your hand. Never liked A2 grips much, my hands are large enough that the little A2 grips fill like I'm holding onto a pencil.

[Snaps]

Here's mine, nothing major. Aimpoint, ARMS mount, went with the titanium fireing pin, standard issue military sling, got one of the mag cinch(SP?) pieces but not in the pictrue.

http://www.imagestation.com/picture/sraid67/pb7ea6c92ed0a493f5bbd41dc50d9b5c1/fbc5255e.jpg

[BusMaster007]

Hank,

Shoot 60x60 rounds through that HBAR!
Perhaps you don't realize the value of that gun yet... ;)

[444]

I got an upper back today from KKF to complete one of my AR projects; the super lightweight AR. I don't have a picture yet, I will try to take one in the next day or two.
I sent a 16" Bushmaster upper to Kurt's Kustom to have the barrel turned down to his lightweight configuration and also to have one of his excellent muzzle brakes installed. The barrel was cut back so the overall length is just over the legal minimum. http://www.kurtskustomfirearms.citymax.com/catalog/item/29585/1132.htm
The upper and lower recievers are standard stuff, I didn't try to trim weight there.
The stock is an Ace ARBT boom tube which is the first stock pictured on this link; http://www.riflestocks.com/html/ar15_m16_products.html
I still need to add a Wilderness single point tac sling with a Daniel Defense attachment plate along with a PRI Big Latch.
I also add a Les Baer hard chromed extractor, a Wolf extra power extractor spring, and a black extractor spring insert to all my guns.
Sights are standard A1.
I wanted Kurt to put a FIRSH on it, but somehow that got lost in the whole process. I don't know if I can do it now with the muzzle brake installed.


I don't have any way to weigh this carbine, but my goal was to be less than six pounds and hopefully closer to 5.5 pounds. I guess I will go to Wal-Mart and buy one of those things you use to weigh fish. I had no particular reason for this, but a couple years ago, I got seriously bitten by the AR bug and this was one variation that I didn't have.

With this project out of the way, I have two more irons in the fire. I am going to send Kurt my Bushmaster M4orgery and have him remove the mini-y-comp brake and install one of his brakes that looks like a military suppressor. That should take 4-5 months to get it back. When I get it back, I am going to put a KAC RAS II on it and an Aimpoint ML2. I am also going to put a PRI Gas Buster charging handle which comes with the Big Latch. And finally to top it off I am possibly going to get the latest M4 bolt for it that has the duel extractor springs.
In the mean time I am going to take my Bushmaster Varmiteer and fashion it into a sort of SPR clone. I am going to put a VLTOR clubfoot stock on it, and a Knights Armament free floating, long RAS on it. I would also like to put a different scope on it eventually.

My main "go-to" AR: Tomorrow I should be taking deliver of a Surefire M910A weapons light, and a Dieter-CQD Tactical Hand Grip . Next payday, I am going to get the Gas Buster charging handle for it, and eventually I want to get the new M4 Bolt for it also.

The beauty of the Surefire M910A light is that I will be able to use it on three of my ARs that are eqipped with rail systems and I would have been able to use it on the ultalight rifle if the FIRSH had been installed.

[HankL]

BusMaster007 , I hear what you are saying but I have others to play with.
Best Regards,

[Chris]

Here's a link to a pic of my AR

http://www.picturedot.com/FetchImageJPG.asp?ImageType=P&ImageFormat=H&ImageID=64461

[RussB]

Chris' Gun...

http://www.picturedot.com/FetchImageJPG.asp?ImageType=P&ImageFormat=H&ImageID=64461

[4Truck]

Armalite M15A4 carbine, Aimpoint Comp C

Edited to Say- If anyone can make this picture look better, have at it

[QuarterBoreGunner]

Why not?

Not quite the whole family:
http://www.swedcom.com/test_images/dads_side.jpg

Close up of the gizmo shorty:

http://www.swedcom.com/test_images/BushyM4front.jpg

http://www.swedcom.com/test_images/BushyM4rear.jpg

[PeteyPete]

http://www.eden.rutgers.edu/~petecav7/bush.jpg