Sticky shells in my PW 808b


PDA






roiHunter
January 28, 2008, 09:15 PM
I reloaded shot shells using my dad's PW 808B 20 years ago and recently starting reloading again after I inherited it because my son and I started trapshooting. I recall from my earlier days reloading that some shells would stick in the die when being ejected.

I started having the same problem again and started investigating what would cause that to happen, but have been unsuccessful in finding the cause. I have disassembled the press and found the inside of the dies had some corrosion, which I found strange because they are stainless steel. But none the less, I scrubbed the inside of the dies with steel wool until they were clean and bright. The problem persists.

I found that newer and older shells stick alike, and perhaps the newer shells are worse. But without collecting data and statistically analysing it I canít tell a difference. Nothing about any one shell stands out. I have numbered the dies to see if there is a connection there, but again nothing obvious.

Any suggestions or experiences that you can share would be appreciated.

roiHunter

If you enjoyed reading about "Sticky shells in my PW 808b" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
If you enjoyed reading about "Sticky shells in my PW 808b" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!