Two "new" M&Ps this week :)
Gator
January 31, 2008, 08:23 PM
Both these came into the local shop on consignment. They are old cop guns and show it, but that's just what I like. First is a 1905, fourth change made in 1934.
http://img.photobucket.com/albums/v135/Galt38/m_p1934.jpg
http://img.photobucket.com/albums/v135/Galt38/m_p19349.jpg
Not bad for $270. Next is a 2" made in 1948, it was a little more...$330.
http://img.photobucket.com/albums/v135/Galt38/IMG_19272.jpg
http://img.photobucket.com/albums/v135/Galt38/IMG_19262.jpg
Love those classic Smiths! I'd rather have these than brand new S&Ws any day.
P.S. There goes my "tax rebate!" :D
If you enjoyed reading about "Two "new" M&Ps this week :)" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
dhoomonyou
January 31, 2008, 08:26 PM
very well spent.
Brian Williams
January 31, 2008, 08:56 PM
Nice. I would love to find a nice 1905 4th change with a round butt and a 5in barrel.
DougDubya
January 31, 2008, 09:11 PM
Sometimes, you really just cannot top the original.
Those old beauties are a joy!
Old Fuff
January 31, 2008, 09:23 PM
Be aware that the snubby is a so-called “transitional,” meaning that it has the pre-war long action combined with the post-war hammer block – the best of both worlds. These are no longer common, and the 2-inch length is particularly scarce. The long action revolvers either have, or can be tuned to have, what many believe is the best double-action trigger pull ever offered on a production revolver – it’s a combination of design and skilled hand fitting. Your other revolver has the long action, but not the positive hammer block.
GunNut
January 31, 2008, 09:34 PM
Congrats, great looking guns.
Gator
January 31, 2008, 09:37 PM
Thanks for the info Old Fluff! The trigger pull on the snubby is rather heavy at the moment and could do with some work. It is nice to know its potential. :)
Old Fuff
January 31, 2008, 10:18 PM
First thing - it should be detail striped, cleaned and lubricated. It could be that this hasn't happened since the 1940's. Then, because it's a long action you can play with the springs, but just a little bit. From the point of hand-fitting the older revolver is even better, but it too needs a good cleaning and lubrication.
Cowboy loads - made for the SASS bunch, are usually loaded with 158 grain lead bullets @ 760 FPS out of the 4-inch barrel, and will likely shoot to the point of aim at about 20 yards. Same with the snubby.
If you enjoyed reading about "Two "new" M&Ps this week :)" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.