Lee FCD vs Dillon taper crimp die


PDA






karnaaj
March 19, 2008, 09:55 PM
Having finally lost all patience waiting for Midway to restock the Lee FCD I went to the Dillon site to look at what they had. More expensive but at this point I don't care as long as it does the job. So what are the opinions on the Dillon as far as ease of use etc? Thanks

If you enjoyed reading about "Lee FCD vs Dillon taper crimp die" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
mc223
March 19, 2008, 10:25 PM
I use 2 of the Dillon Taper crimp dies. 1 for 38 super/.38/357 and one for 223. Well worth the extra $. I also believe that the Dillons do less damage to the bullet.

Grandpa Shooter
March 19, 2008, 10:33 PM
In my opinion it depends on what you are loading. Resizing the brass because you belled it with a powder charging die and taking the bell out is different from actually crimping the case into the bullet or cannelure.

38 and 357 require a good crimp into the bullet, as does 30-30 or any other tubular magazine rifle.

Straight wall cases such as 380, 9, 40, 45 etc only require taking the bell out.

I use the Dillon on straight wall cases to resize them, the LFCD to put a crimp into 30-30.

Quickdraw McGraw
March 20, 2008, 07:10 AM
Having finally lost all patience waiting for Midway to restock the Lee FCD I went to the Dillon site to look at what they had. More expensive but at this point I don't care as long as it does the job. So what are the opinions on the Dillon as far as ease of use etc? Thanks

I just ordered FCD for 223 from Midway on Mar 19th and it will be here on Mar 21 and shipping was cheaper than Midway. Here's a link listing all their FC Dies.

http://www.midsouthshooterssupply.com/search.asp?search=factory+crimp&submit=Find+it%21&typ=All&mfg=00006&dept=RELOADING

stubbicatt
March 20, 2008, 07:55 AM
For my rifle cartridges I prefer the FCD. For straight walled pistol cases, of which 40 cal is the one I load the most frequently, the Dillon is my choice.

Since I mostly shoot coated lead bullets in my 40, they are a little larger in diameter than jacketed bullets. Consequently, the FCD's little carbide ring tends to size the case down a little smaller, and this in turn mashes the lead bullets enough to cause leading in my barrel. When I use the Dillon, it only touches the case mouth, and irons out the bell introduced at the charging/belling station on my press. I get no leading when I use the Dillon taper crimper on my 40.

On both the 223 and the 308 where I often load bullets with a canellure, the Lee FCD works very well. I have not tried the Dillon taper crimper in this application as I haven't felt the need. Also the non canellured bullets don't receive a crimp in my rifle cartridges.

loadedround
March 20, 2008, 08:16 AM
Do you want to drink cheap beer or champange? Dillon's are the best.

If you enjoyed reading about "Lee FCD vs Dillon taper crimp die" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!