[KFD147]

I recently aquired a 550b from my father. I am starting to reload 40 S&W and I don not know what is the number of the pins that go in the base plate. I know that you can use the same baseplate for 9mm, 38 super, and 40 S&W, but they use different pins. Also, do I have to get a separte powder tube or can I use the one for 9mm. Any and all help would be apprieciated.


Thanks
Jason:cool:

[HSMITH]

http://www.dillonhelp.com/rl550benglish/cal_cross_ref_chart.htm

That chart tells you everything you need to know. Holler if anything else comes up.

[KFD147]

Thanks! That is exactly what I need.:D :D :D :D


Jason:cool:

[Blackcloud6]

The chart of what components are needed for each caliber is on the back page of the press's manual.

[Steve Smith]

You should contact Dillon and ask them for another manual.

[RUT]

http://dillonprecision.com/manuals/manual.cfm?

You can simply print off the appropriate Dillon manual here. :-)

[Johnny Guest]

Thanks for showing that link, RUT. I've been meaning to order a current manual myself. Manual for my 550B is printing now. Guess I ought to read it cover to cover and see if I can detect any differences from my latest - - Some four or five years old, which I got to update the original, from about 1990. ;)

Best,
Johnny

[RUT]

Johnny,

You're quite welcome!

===RUT===

[C.R.Sam]

RUT...
I grabbed it too.
Thankee sir.

Sam