Need opinion on Thumler Model AR-2


PDA






sig228
May 27, 2008, 10:42 PM
Hi all. Looking for a rotary tumbler and I would like to know if anyone uses the Thumler Model AR-2. I see a lot of opinions here on the Model B, but I can get an AR-2 for about half the cost of a Model B. I know it holds about half the volume overall, but I'm just a casual shooter / reloader and probably would only clean 500 casings of .357/.38/.45 brass each month. Also, I presume the small ceramic media works best in these type tumblers. Any opinions are much appreciated.

If you enjoyed reading about "Need opinion on Thumler Model AR-2" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
esheato
May 28, 2008, 12:07 AM
DON'T DO IT!

The A-R2 is extremely small. The individual tumblers are approximately the diameter of a one liter soda bottle and about half as tall. I would guesstimate that I could probably fit 75-100 .45 ACP cases in each tumbler. IMHO, not worth my time...but I'm a fairly high volume loader.

When it arrived, I had it in the house for about 10 minutes before calling the company and requesting a return.

FYI, walnut media works just fine in the rotary tumblers. I usually leave mine on for a few days at a time because it's so quiet. I will say that the rotary tumblers shine brass like no other. I have several other vibratory tumblers and they don't compare in the shine department.

Ed

TexasSkyhawk
May 28, 2008, 01:24 AM
Agree with Ed--the AR2 is just too small, no matter how much or how little brass you're going to tumble.

I've been using an AR12 model for twenty-plus years--has a twelve pound capacity, which I regularly go over.

I use the Zilla walnut I get from Petsmart and tumble for between six and twelve hours. Brass comes out looking better than brand new--inside AND out.

Jeff

John E.
March 24, 2009, 09:42 AM
I bought one just this Saturday for $20 at a pawn shop. Needs a new belt, but the motor works so I felt pretty good about finding a bargain.

Then I come here to do some research on it and find this thread. Bummer, but then again, I'm just getting into reloading, so if I go into it in a big way, I'll upgrade.

liljohn
March 24, 2009, 05:38 PM
For $20, it's a steal. It's still a good, dependable, quiet tumbler that will likely be trouble free for years.

I've got the little one and the big one. I use both regularly. Even the little one has enough capacity to handle 100 44mag cases; definitely useful. They are both quiet, too.

The only thing I don't like about the little one is the lid is retained with a rubber band. The rubber band holds the lid a little too tightly, and over the years it eventually broke the rubber lip on the drum. I bought a replacement drum (not cheap) and made my own lid out of a peice of hardboard (which is thicker than the stock lid). It supports the lip better so the drum should last longer.

I say this like it's a problem; the first drum lasted 20 years. Maybe my custom lid will ensure the second drum lasts 40.

I use corncob I get from Petsmart treated with a couple tablespoons of NuFinish car wax. It only takes an hour or so to get the cases good and shiny with no residue left behind.

If you enjoyed reading about "Need opinion on Thumler Model AR-2" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!