Sig maintenence


PDA






357wheelgunner
July 15, 2008, 06:58 PM
My Sig P6 will be here next week. In preparation, I've ordered a spare parts kit which includes:

Recoil Spring
Trigger Bar Spring
Slide Catch Lever Spring
Decocking Lever Spring
Outer Roll Pin
Inner Roll Pin
(4) Grip Screws
(4) Grip Screw Washers

I've also ordered Wolff magazine springs and hammer spring.

I'm planning on installing all of the new springs immediately. Anyone know of a link with more information on the disassembly of a Sig P series pistol?

Also, what should I look for when the gun is apart, are there any other parts that should be replaced?

Thanks!

edited to add:

What can be done to fix a heavy trigger pull, without sacrificing reliability?

If you enjoyed reading about "Sig maintenence" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Muddflap
July 15, 2008, 07:31 PM
If you want to do this kind of thing yourself, I would HIGHLY recommend the Sig Armorer's CD from Top Gun Supply. http://www.topgunsupply.com/Sig-Sauer-Armorers-Course-DVD-P-SERIES-pr-131.html

Since the P6 has a terrible DA trigger pull, I would recommend getting a 225 mainspring, also available from Top Gun. http://www.topgunsupply.com/SIG-Mainspring-P225-226-228-229-239-Old-Style-pr-767.html That will cure the trigger problem

Good luck.

357wheelgunner
July 15, 2008, 08:23 PM
Do I need the little metal plate that the spring sits on?

AK103K
July 15, 2008, 08:23 PM
I would HIGHLY recommend the Sig Armorer's CD from Top Gun Supply.
Me too. It will walk you through everything you need to know.

AK103K
July 15, 2008, 08:24 PM
Just reuse the one thats there.

rcmodel
July 16, 2008, 12:06 PM
Heres spring info I posted some time ago:
http://www.thehighroad.org/showthread.php?t=358615&highlight=sig+p6

rcmodel

If you enjoyed reading about "Sig maintenence" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!