Minimalist Cleaning Kit?


PDA






Skunkabilly
January 14, 2003, 02:04 AM
Could I get by well-stocked with lots of brake cleaner, a bottle of breakfree, and boresnakes for each caliber?

If you enjoyed reading about "Minimalist Cleaning Kit?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Kevlarman
January 14, 2003, 07:12 AM
I'd still get some real rods in addition of the boresnakes. As good as they are, there's no substitute for real scrubbing with a rod.
And besides, you can't hammer out a barrel obstruction with a snake. :)

Kahr carrier
January 14, 2003, 07:41 AM
Brake Cleaner??????

TarpleyG
January 14, 2003, 10:54 AM
Brake Cleaner??????
Cleans EVERYTHING off metal parts. Do not use on plastic though. They sell Gun Scrubber for $7 a can and you can get Brakleen (the same crap) for $2-$3 a can.

GT

10-Ring
January 14, 2003, 07:08 PM
I have replaced Break Free w/ Militec, for what it's worth ;) I'd add a rag to your kit too.

No4Mk1
January 14, 2003, 07:22 PM
When I read the topic, that was almost exactly the kit I was thinking of. However, I would suggest this for "field expedient" cleaning, not for long term maintenance. My habit is to use the "field expedient" method after each range session then give a good cleaning once a month. My CCW is exempt from this, and gets a thorough cleaning after each use.

Dave Markowitz
January 18, 2003, 10:07 PM
Make up some Ed's Red (http://www.building-tux.com/dsmjd/tech/eds_red.htm) . It's a good general purpose gun cleaner, and I've found it handy around the house, too.

sm
January 18, 2003, 10:49 PM
Otis Pull through system. Skunk you'll like the Tactical Kit :D

At the range with students I can go from 22lr to 12 bore. Yes I have even removed squib loads. I prefer to use a steel un-coated rod for serious removal of stuck rds, and serious cleaning. I use the Otis in the field ( I may take whole kit or only the cable for gun in use). I have used a varient of this system before Otis came out with it. Leather thong is what we called it, used on 22lr -12 bore. Boresnakes are cal./bore specific--since mine is paid for and multi caliber-plus not having to clean a snake --My preference.
Personally stay away from aluminum and coated rods, prefer one pc, but still have the 3 pc military style I bought in the mid 60's.

For a long time I had a Kleen-bore kit and used only their Formula 3, Leather thong, Hoppe's #9 . Q-tips, pipe cleaners, lighter fluid completed the method for a very very long time. Oh a muzzle guard was added--wooden thimbles whittled is what I had to use until the fancey ones came out.

Reminds me, I have nothing to clean and lube with around the house, gave all the junk I won and collected to a Scout troop. Last time I just used Zippo lighter fluid to clean found a few drops of something to lube in my old shell pouch stuff 'bout 10 yrs old--wouldn't have cleaned but rain and mud and 500 rds or so- figured why not.

STEVE M
January 19, 2003, 10:01 AM
Don't forget a toothbrush!

VictorLouis
January 21, 2003, 03:29 PM
Ballistol(aerosol), Break-Free and Eezox(smallest sizes), MPro-7(small bottle).

Two CCI 100-ct .22LR plastic boxes with sliding lids contain patches, short rods, brushes, jeweler's drivers, jags, tube of grease, etc. Rest of vacant space has room for 3pc. rod, toothbruses, Brownell's driver w/handle storage, plastic rods etc.

Eclectic mix that works for me.:D

Ledbetter
January 21, 2003, 05:26 PM
Mineral spirits/Stoddard Solvent does the same thing as lighter fluid and is cheaper and less flammable. I use it for lots of things around the bench. It's like non-aerosol Brake cleaner/gun scrubber.

garrettwc
January 21, 2003, 06:41 PM
My kit is a rod, jag, bore brush, some patches, a toothbrush, and a bottle of FP-10.

You could pare it down even more with one of the Otis Kits suggested if you are looking for something for range or bugout bag.

If you enjoyed reading about "Minimalist Cleaning Kit?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!