Where to find CZ 75 parts and gunsmithing ?


PDA






Riss
August 31, 2008, 04:45 AM
Have been contemplating a CZ-75 for some time now but have not had much luck in finding info on trigger jobs, replacement parts, springs, spare magazines etc. Does anyone have a good source for parts ?

If you enjoyed reading about "Where to find CZ 75 parts and gunsmithing ?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
gb6491
August 31, 2008, 05:42 AM
Parts/Repair: http://www.cz-usa.com/

Parts and Gunsmithing:
http://www.ghostholster.com/
http://www.miossigunworks.com/

How to:
http://www.czforumsite.info/index.php?PHPSESSID=i68tapga44k8688t6qk85880h4&board=59.0

Regards,
Greg

schildgen
August 31, 2008, 07:38 AM
I had Mike Eagleshield at Cz-USA do a DA/SA trigger job on my 85b when I got it. If you look around for MecGar magazines they are much cheaper than "official" Cz mags and just as good.

http://www.scottschildgen.com/photos/212498683_GduHb-X2.jpg

burningsquirrels
August 31, 2008, 07:55 AM
Riss, gb6491 hit the nail on the head. if you need any further help, feel free to pm me.

i highly recommend getting the competition hammer, 15 pound mainspring, extra power extractor spring from czcustom.com, and then a recoil spring tuning kit from miossi gunworks. if you want single action only, i recommend the SA trigger from czcustom.com as well.

the best source for 9mm and 40sw magazines is cdnninvestments.com as well.



https://www.student.gsu.edu/~ggingco1/post/cz40b_SAO_small.jpg

railroader
August 31, 2008, 10:11 AM
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=918412&t=11082005
Here's mecgar cz75 mags on sale. Mark

j1979
August 31, 2008, 11:11 AM
cdnn also has cz 75 mags for 19.99 for 15 rounders

Riss
August 31, 2008, 09:20 PM
Thanks for the links. Hard to know who on the net is good and who is a nobody. Planning on getting the 75 B SA to start off. Wanted a new IPSC Limited gun. May turn the Glock 35 into an open gun. And if you did not notice Ghost Products has some really good prices on CZ's currently.

burningsquirrels
September 1, 2008, 12:31 AM
whitaker guns has a CZ75 for 369 with no magazines.... since you'll be making it a limited gun, you'll want the longer SP-01 magazines and beretta +2 basepads anyways. with trimming the follower you can get 23+1 and still pass the 140mm gage; 'eerw' has pics on the cz forums of the ones he made sitting nicely inside the gage. then install an SA trigger and comp hammer with the springs. in addition, czcustom.com has nice aluminum grips for the CZ75 frames.

what's nice about getting the 75 SA off the bat would be the different, easier to reach safety, and already runs SA out of the box. but iirc, there's a different comp hammer for the SA models... so you'd need to do more work than if you dropped the da/sa comp hammer into a regular pistol and installed the SA trigger as an afterthought.

i put both the comp hammer and sa trigger on my 40b in the picture above, they both went in easy. i have threads on czshooters and czforumsite.info with pics in the 40b section...

railroader
September 1, 2008, 12:49 AM
I got my 75sa from whittaker guns. They have about the best price around. Mark

Rmac58
September 1, 2008, 06:33 AM
I understand MecGar makes all CZ's mags.

If you enjoyed reading about "Where to find CZ 75 parts and gunsmithing ?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!