Moss500 breacher project finished!


PDA






kingjoey
September 10, 2008, 03:17 PM
We took a standard 8-shot 500A and cut the end of the barrel and barrel lug off. We installed a KA-1212BR via hidden weld and turned the collar smooth on the lathe. We then put the lug and stub in a jig on the mill and cut the radius for the lug to match the 1.124" OD of the KA-1212BR. The lug was then silversoldered to the KA-1212BR at the appropriate distance and the whole ass'y was blasted and parkerized.

EDIT: Sorry if the picture looks like butt, I didn't set up the usual lighting and gear for pic taking so it looks muddy and distorted.

http://i3.photobucket.com/albums/y99/kingjoey/KA%20Stuff/082608023.jpg

If you enjoyed reading about "Moss500 breacher project finished!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
kingjoey
September 10, 2008, 03:20 PM
OK, we got a bit tied up this week, but finally buttoned it up yesterday. We added a SF-IV stock, SideSaddle, Wolff mag spring, and ST no-jam follower. The entire gun was sandblasted, parkerized, then Duracoated matte black. We installed a HiViz fiberoptic front bead as well. It was a lot of work but came out beautifully (the pics don't do it justice). It'll be at our table at the Phoenix show this weekend.


This is what we started with:

http://i291.photobucket.com/albums/ll284/kingarmory/Moss500A%20project/50579.jpg

This is what we ended with:

http://i291.photobucket.com/albums/ll284/kingarmory/Moss500A%20project/9-9-08168.jpg
http://i291.photobucket.com/albums/ll284/kingarmory/Moss500A%20project/9-9-08a003.jpg
http://i291.photobucket.com/albums/ll284/kingarmory/Moss500A%20project/9-9-08164.jpg
http://i291.photobucket.com/albums/ll284/kingarmory/Moss500A%20project/9-9-08a007.jpg
http://i291.photobucket.com/albums/ll284/kingarmory/Moss500A%20project/9-9-08a005.jpg

RacingJake
September 10, 2008, 04:50 PM
Man that looks good !

BlackJackal
September 10, 2008, 04:56 PM
love it, needs a knoxx stock though :)

DAVIDSDIVAD
September 10, 2008, 05:04 PM
Wow, that looks great.

jayofthejungle1985
September 10, 2008, 09:06 PM
that is B.A.

kingjoey
September 11, 2008, 02:09 AM
I was quite impressed with how it came out. I'm always nervous when we're trying something new, there is so much that can go wrong. The project went together smoothly, almost like we knew something about doing shotgun barrel work :D

NonConformist
September 12, 2008, 09:31 PM
Thats pretty cool!

If you enjoyed reading about "Moss500 breacher project finished!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!