7-30 Waters with Lead bullet loads


PDA






Seafarer12
September 19, 2008, 10:51 PM
I was wondering if anyone had any loads for a 130 grain GC lead bullets. I was thinking of some low buck loads for my Contender and fire forming brass. All of my books have loads for jacketed bullets.

If you enjoyed reading about "7-30 Waters with Lead bullet loads" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
snuffy
September 19, 2008, 11:22 PM
Lyman 48 th loading manual has one bullet weight listed for the 7-30 Waters, 135 grains. Powders listed are; SR 4759, XMP- 5744, RX7, IMR-3031, 748, AA2460, and H-335. To save me some typing pick which ones you have, I'll post the loads.

Seafarer12
September 20, 2008, 11:35 AM
Thanks Snuffy. Well darn I don't use any of them regularly. I will say 2460 and 335. Thanks again.

snuffy
September 20, 2008, 11:52 AM
Okay, here's what Lyman says for those two;
AA2460- start 26.0 vel 1882 max-32.0 vel 2273
H335 start 26.2 vel 1904 max- 32.0 vel 2300
That's for a 135 grain rn gas checked bullet. It should be safe for a 130 grainer as it's 5 grains lighter.

Seafarer12
September 21, 2008, 12:29 PM
Thanks Snuffy, You know I use to work with a guy named Snuffy down here in Texas.

If you enjoyed reading about "7-30 Waters with Lead bullet loads" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!