Glock 3.5# connector


PDA






tlen
October 5, 2008, 09:39 PM
I put a 3.5# Scherer connection in my G23 hoping to improving the trigger. Near as I can figure the trigger pull decreased from ~6# 8 oz to ~5# 2oz. Should I do a happy dance or be disappointed ?

If you enjoyed reading about "Glock 3.5# connector" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
chilic82
October 5, 2008, 09:49 PM
That's about all they will lower it. Did you polish the internals a little while you were in there. It seems to help some also.

fineredmist
October 5, 2008, 10:01 PM
Replace the trigger and striker springs with 6 lb springs, it will smooth and lighten the pull. The springs are availible from Ghost for about $6.00. I have installed them on my 19,22,23 and 26 and they really do help. The 6lb striker will give you a definite feel as to when the trigger will release and it also gives you a heavier hit on the primer.

RM
October 5, 2008, 11:07 PM
I heard that a 4# striker spring will give you a lighter trigger pull. You find the 6# striker spring works better?

kolob10
October 5, 2008, 11:12 PM
I got the same results with my model 30 & 23. I don't believe I want mine any lighter though.

Black Majik
October 5, 2008, 11:15 PM
Get a wolff competition spring set for the striker, plunger and trigger. It will make a large improvement in lowering the trigger pull weight. Also, beveling the plunger safety helped too. And yes, polish the internals.

Good luck.

trickyasafox
October 5, 2008, 11:22 PM
I don't have a trigger pull gauge- but it didn't make tons of difference in my 23- the stack is a bit smoother though and for the price I was content with the switch.

tlen
October 13, 2008, 06:25 PM
FYI… I went ahead and installed a Wolff Competition Pak #33230 which made the trigger definitely break cleaner and feel more crisp. Trigger pull results were as follows:
~6# 8oz. OEM
~5# 2.5oz [20% drop] after 3.5# Scherer connector
~4# 4.3 oz [35% drop] after 3.5# Scherer connector and Wolff Competition Pak

Andy-Y
October 13, 2008, 06:30 PM
Just wondering, is this on your CC pistol? I only ask because some people seem to freak out when I mention doing ANYTHING to my stock G17 that I CC.

Sorry, don't mean to thread-jack :)

If you enjoyed reading about "Glock 3.5# connector" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!