Mr. Clean for 44SPL


PDA






Falcore
October 15, 2008, 10:38 AM
What is your cleanest burning powder for 44 SPL and 44 Mag?

If you enjoyed reading about "Mr. Clean for 44SPL" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Walkalong
October 15, 2008, 10:44 AM
700X for .44 Spl. & AA # 9 for .44 Mag.

Galil5.56
October 15, 2008, 11:13 AM
International Clays is incredibly clean in both with std velocity loads, as is Solo 1000 used in 45 auto at velocities/pressures similar to 44 Special... Real accurate too with cast bullets.

Walkalong
October 15, 2008, 11:26 AM
+1 for Solo 1000. It is very similar to 700X. Good stuff, but I got a deal on 5 lbs of 700X. ;)

Ben Shepherd
October 15, 2008, 12:05 PM
44 special? Can't say, not enough experience to form an opinion yet.

44 mag? Vit N110. Cleanest there is. But expensive.

RidgwayCO
October 15, 2008, 09:55 PM
.44 Special - VihtaVuori 3N37

.44 Magnum - AA #9 or VihtaVuori N110 (toss up)

tbtrout
October 15, 2008, 10:22 PM
Trail Boss for lead soft shooting loads. Very clean

.38 Special
October 15, 2008, 10:36 PM
Another vote for Trail Boss.

RB98SS
October 16, 2008, 10:50 PM
By far, N110 for .44 mag.

Sgt.Dusk
October 16, 2008, 11:29 PM
Another vote for vihtavuori N110

Floppy_D
October 16, 2008, 11:47 PM
2400... I run a 240g LSWC with 10g for spl and 20g for mag, and have a pair of sweet loads that keep a gun clean. There may be cleaner loads, but they don't get more accurate. Keep us posted on your findings.

Glenn J
October 17, 2008, 01:32 AM
I have been using 2400 recently and it is very clean. I was using bullseye which is economical since you can load a mag with 4 or 5 grains for a nice target load, but it is really dirty, and hard to get your gun clean.

Glenn

If you enjoyed reading about "Mr. Clean for 44SPL" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!