Nothin' beats a good piece of hickory!


PDA
Cosmoline
September 18, 2003, 08:58 PM
Well I was on a quest for a nice salmon killing stick, and all I could find were overpriced, heavy little pine cudgles with cracks in them. So I opted to do it myself, and picked out a very nice hickory axe handle for a small hatchett. After some trimming, I found myself with one of the most fearsome weapons I've every held. It's narrow and thin on one end, and the other end has a thick bulb. The shape is perfect for maximizing impact with either end. It's FAST--VERY fast. Even in my slow hands it springs out and thwacks in the blink of an eye. And it's both strong and light weight.

Suffice it to say, it's not just for salmon now. For non-lethal hits, you can use the flat sides and hold the knob. For lethal hits, either spin the flat sides on edge or flip it around and use the knob. One or two hits and the game is over--this is no ordinary stick!

At $10, you can't go wrong.

If you enjoyed reading about "Nothin' beats a good piece of hickory!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
mete
September 18, 2003, 09:46 PM
We don't have salmon here, but salmon that attack you ? WOW !! They sell pine sticks for that ? crazy. Hickory will do fine.

Hkmp5sd
September 18, 2003, 10:00 PM
IIRC, Clint Eastwood in Pale Rider agreed with your assessment of hickory.:)

Betty
September 19, 2003, 12:47 AM
As a kid I kept a hickory axe handle by the bed (you never know when those monsters are going to come out of the closet). Fiberglass axe handles are good, too.

hso
September 20, 2003, 10:00 PM
Hickory has great properties - springy, strong, straight grain yet resistant to splitting. Gee, no wonder that it's used for axe handles and canes.

C.R.Sam
September 20, 2003, 10:04 PM
But officer, that is a spare handle for my framing hammer.
And they work well.

Sam

El Tejon
September 20, 2003, 10:16 PM
Get a twin and I'll teach you the "two short rod" form from White Crane.:D

The baton is an excellent weapon and overlooked (in good and bad ways).:cool:

hso
September 21, 2003, 01:36 AM
Crook top cane's rapidly becoming my favorite antisocial tool.

C.R.Sam
September 21, 2003, 02:54 AM
I am almost never without my cane.
Shootin your own cane doin drills is good entertainment.
For others.

Drop cane while drawing,
Fire while dropping to ground.
Sometimes the cane doesn't fall right.

Sam

brownie0486
September 21, 2003, 03:46 PM
My canemasters instructors cane of hickory heart is a companion at times.
I just mineral oiled it again, soaking it over night, then a wipe down.

Winters coming so needed to get it ready for the salt and snow.

I have a vigney walking stick on order arriving this week hopefully. Not sure if I will like it but it wasn;t a lot of money.

Brownie

hso
September 22, 2003, 04:02 PM
brownie,

You can get micarta rod stock with marvelous cross sectional density in almost any diameter for a few dollars a foot. It's almost impossible to break :D

El Tejon
September 22, 2003, 05:48 PM
hso, cool. Where?

Dave P
September 22, 2003, 06:22 PM
I know that Boyd Boys sells laminated walking sticks ...

sticks (http://www.boydboys.com/stick.asp)


but I too would like to hear about the rod stock.

El Tejon
September 22, 2003, 06:35 PM
Dave P, can you get the stick customized? I'm thinking a black and green natural-length staff.

Coolness.:D

brownie0486
September 22, 2003, 06:41 PM
hso:

Never heard of the micarta rod stock. Interesting, anywhere to look for this stuff locally? On the net?

Thanks for the heads up.

Brownie

hso
September 22, 2003, 10:22 PM
Check your local yellow pages for plastics dealers and ask them if they have micarta phenolic/fabric rod stock available and that you're interested in a suitable length. I'd go to the hardware store and get a dowel the size you want and get the feel for it before I ask. A 3 ft. piece may run $21 for a 1 in. diameter piece of canvas micarta. I've got a couple of suppliers who've emailed prices to me so I'll send those along for good measure when I get in to the office.

1 in. micarta is heavy and doesn't transmit shock to the hand the way other materials do.

hso
September 23, 2003, 11:48 AM
From Aciplastics

-----Original Message-----
From: Mike Conway [mailto:mikeconway@aciplastics.net]
Sent: Friday, September 05, 2003 4:41 PM
To: Crenshaw, Mike
Cc: jamiew@aciplastics.net
Subject: Re: Micarta rod


Mike,

The Micarta comes in 3 basic compositions with a minimum rod length of 4ft. The price per foot is as follows:

Paper $5.20
Canvas 5.96
Linen 7.96

The minimum order is $100. If you need cut to size let me know.

Dave P
September 27, 2003, 07:12 AM
Kirk wants his rod customized?!? Sounds kind of kinky. But I'll tell you what, send it to me and I'll carve in your initials, or maybe "ET - Phone Home!" :D

El Tejon
September 27, 2003, 02:10 PM
Alright, alright, this is the "High Road", remember.:D

Dave, a black and green natural length for mantis would be REALLY cool. (I know, can't help myself).:cool:

If you enjoyed reading about "Nothin' beats a good piece of hickory!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!