Graf's finally came thru


PDA






cajun 48
December 1, 2008, 07:09 PM
OK here's what I have:
Lee classic cast 4 hole turret (turrent for rondog:eek:)
Lee .45acp deluxe dies, auto pro disk w/riser, adj charge bar, safety prime and ABC's of reloading.

next order:
rcbs 505 (thanks guys you twisted my arm hard enuf)
lee reloader single stage (includes lee reloading manual for
an extra 79 cents) universal decapping die, bullet puller (graf's), berry's 200gr pswc bullets (only 100 have to make sure the M&P will eat them) hp38 powder and cci primers.

:banghead:what else? Have to be missing something!

ajb

If you enjoyed reading about "Graf's finally came thru" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
RustyFN
December 1, 2008, 07:35 PM
Congrats, I love my turrent press.:D I might have missed it but a caliper would be a must have tool IMO.

Chief-7700
December 1, 2008, 08:30 PM
Hum I do not see a scale included with this order nor a case gauge.
Chief

rfwobbly
December 1, 2008, 09:24 PM
Good quality, electronic readout, 6" digital calipers are on sale this month at Harbor Freight for ~$12. These are In/MM reading, inside, outside, depth reading. They come with a case and spare battery.

You can order on-line.

cajun 48
December 1, 2008, 10:19 PM
chief, rcbs 505 is the scale,
rusty and rfwobbly, yep forgot the calipers. thanks for the catch. harbor frieght should see me amorrow!

RustyFN
December 3, 2008, 12:14 PM
I don't see a reloading manual. The ABC's is a good book but doesn't have powder data. You will want to clean your brass before you size it. The easiest way is a tumbler. I bought the Cabela's tumbler and am very happy with it. It's this one.
http://im1.shutterfly.com/media/47b8dc36b3127ccec3368c89b69d00000010O00DZOGblm4Yg9vPhI/cC/f%3D0/ps%3D50/r%3D0/rx%3D550/ry%3D400/
You can pick one up for $45. I use crushed walnut from the pet store for media. I add a cap full of Nu Finish car polish and a used dryer sheet or paper towel cut into ten pieces. The car polish will help clean faster, keep the dust down and make them shiny. The dryer sheet will help keep the media clean. There are other ways to clean the brass so you don't have to buy a tumbler but to me the other ways are too time consuming. Load safe and have fun.
Rusty

snuffy
December 3, 2008, 01:04 PM
Are you sure it's not torrent?:confused::D

The single stage is a good idea. Especially if it comes with the lee loading manual.

Daniel1120
December 3, 2008, 02:04 PM
Look into ebay for the RCBS 505. I just bought one recently like new in the box for $45. I know midway has them for about $80 after s+h.

Thats saving almost %50. Yes you have to deal with fleabay, but its alot safer for buyers now.

Oh, and check out the Redding #2 scale, with 505 gr capacity (same as the rcbs). Its the almost the same design with great reviews too.

If you enjoyed reading about "Graf's finally came thru" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!