Cleaning and Lubing a Kahr PM9


PDA






Vegas Silver
December 5, 2008, 04:41 AM
I picked up a PM9 recently and decided to go with Tetra Gun Grease for the sliding parts. I haven't messed around with grease too much, so I'm unsure of how much is enough. I normally use oil, but want to start adhering to greasing sliding parts and oiling rotating parts.

I put a very small bead on each of the 4 rails (2 on slide, 2 on the steel inserts in the polymer) and spread it evenly as best I could. I also put a small bead under the hood that slides over the barrel. I oiled up the rest of the gun as normal. Does this sound right?

Sorry if it seems like a silly question. I just don't want to under lube the gun. Any help or tips are appreciated. Thanks!

If you enjoyed reading about "Cleaning and Lubing a Kahr PM9" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
usp9
December 5, 2008, 08:54 AM
Look here for a good Kahr lube diagram, as well as other good Kahr info;
http://glocktalk.com/forums/showthread.php?t=398500

http://i72.photobucket.com/albums/i186/ripley16/KahrLubePoints.jpg

If you enjoyed reading about "Cleaning and Lubing a Kahr PM9" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!