HK 91/G3 disassembly


PDA






Timradcliffe345
December 20, 2008, 03:43 PM
Anyone have any good resources that detail fieldstripping, maintenance and operations of the HK91/G3/PTR91 weapon system? Thanks.

If you enjoyed reading about "HK 91/G3 disassembly" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
salvo
December 20, 2008, 03:52 PM
Here you go!
http://www.notpurfect.com/main/hk91.htm
http://home.att.net/~j.p.george/HK91.htm

SlamFire1
December 20, 2008, 04:37 PM
This site has a very good sticky about disassembling the trigger pack.

Which I don't recommend doing, but I do recommend downloading for future use.

Also they have a bolt disassembly sticky.

http://www.militaryfirearm.com/Forum/forumdisplay.php?f=23

I found the PTR bolt disassembly tool essential.


http://www.ptr91.com/store/cart.php?m=product_detail&p=127

salvo
December 20, 2008, 05:49 PM
Great link SlamFire1!

TexasRifleman
December 20, 2008, 09:54 PM
In addition to the above, I recommend a Jack Daniels or two before attempting the bolt disassembly/reassembly for the first time.

After the first one it's a snap but the first time can be quite frustrating :)

Onmilo
December 20, 2008, 11:12 PM
http://www.biggerhammer.net
Click the manuals section and log in for PDF versions of the German G3 field and armorers manuals.

Kurt_D
December 21, 2008, 01:39 AM
No matter how bad you might want to, DO NOT PUSH IN THE BOLT INTO THE CARRIER*. It will lock and could be a minor PITA to unlock the first time.

*I wonder how many people have done that the first time and went "oh crap..." when it didn't unlock just as easy? lol.

Destructo6
December 21, 2008, 02:50 AM
*I wonder how many people have done that the first time and went "oh crap..." when it didn't unlock just as easy? lol.
The answer is: everyone who has owned or taken apart a HK roller gun.

Search for the "Hk Green Book" if a link hasn't already been posted.

Thrust_Per_Squeeze
August 21, 2010, 05:19 PM
It's not that hard to unlock the bolt. Just depress the locking lever on the opposite side (I used a plastic punch) to lift the catch, then pull the bolt out.

95cougar
August 21, 2010, 11:01 PM
YouTube used to have several videos on HK91/G3 takedown that helped me out the first time I tried to put a G3 clone back together.

I am a visual learner so watching the video content greatly helped me when in need.

Texasgunlover
August 22, 2010, 10:04 AM
This guy is the grandmaster of the hk family.also carries parts galore.very friendly and can help

If you enjoyed reading about "HK 91/G3 disassembly" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!