Papoose barrel in .17mach2???


PDA






tango2echo
December 21, 2008, 10:45 PM
I own a number of Marlin M70P Papoose rifles with the take-down barrel and short stock in .22LR. Lately I have been wanting a .17mach2 barrel that would fit the papoose. Is this possible, safe, and practical? Would the .17mach2 cycle in the papoose mags and action? Anyone know a smithy that would make one?

Anyone interested in building a 10/22 mag knock-off of the papoose, possibly in .17HMR and/or .22mag? The quickly removable barrel is a must. A hollow stock to hold extra ammo would be a plus.

T2E

If you enjoyed reading about "Papoose barrel in .17mach2???" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rangerruck
December 22, 2008, 01:20 AM
there are dudes over on rimfirecentral that can reline that bbl to mach 2.
but you need to ask over there, because there is no way a standard mod 60 action can take the recoil impulse of the mach 2. when marlin did the 717 in mach2 , the action looked very similar to the regular mod 60, except every part was solid steel, and about 2wice as thick.

rangerruck
December 22, 2008, 01:21 AM
you may look at a majestic arms, for a takedown, very packable, semi, in 17mach2.

mainmech48
December 22, 2008, 12:17 PM
It'd take a good deal more than just a replacement barrel to properly convert your Marlin, if indeed it's feasible at all.

As the only standard for comparison that I know of presently is the kits made for the ubiquitous 10/22, I'll use it as an example.

For the 10/22, doing so requires an entirely new bolt assembly with significantly more mass, a different recoil spring/guide rod assembly and modified magazines plus the proper barrel.

My personal opinion is that you could possibly find a professional gunsmithing firm willing to work with you on such a project, provided that the basic action itself has enough built-in margin to make it doable and you're willing to pay what it will cost to make it happen.

Just a suggestion, but I'd recommend that you contact at least a couple of highly skilled rimfire specialists and discuss what you have in mind with them. I also think that it might be a good idea to be sitting down when they give you the estimate.

tango2echo
December 22, 2008, 10:11 PM
Thanks for the input guys. Sounds like solid advice

T2E

If you enjoyed reading about "Papoose barrel in .17mach2???" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!