Colt pistol guy's, please ident this old Colt


PDA






Sniper X
December 23, 2008, 11:30 AM
http://i10.photobucket.com/albums/a131/Korpela/2008013.jpg

thanks very much guy's!

Kevin

If you enjoyed reading about "Colt pistol guy's, please ident this old Colt" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Jim Watson
December 23, 2008, 11:36 AM
Colt 1903 Pocket Hammer model, calibre .38 Rimless Smokeless, aka .38 Auto or .38 ACP. Made in 1908 according to Coltautos.com
Do NOT shoot .38 Super in this old gun. The brass/chamber dimensions are the same but the Super is about 50% hotter and the old twin link guns are just not strong enough. Some will say they are not strong enough for much of the original load.

Sniper X
December 23, 2008, 11:38 AM
Thanks!

Jim K
December 23, 2008, 02:27 PM
NOTE: To disassemble that gun, push in on the recoil spring plug in the front of the slide below the muzzle and the slide key will drop out to the left side. DON'T try to drive the key out!!!!

And DON'T forget to reinstall the key when reassembling. If the gun is fired without it, the slide will come back in the shooter's face.

Jim

If you enjoyed reading about "Colt pistol guy's, please ident this old Colt" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!